Wireless Multi-Function Access Point A02-AP1-W54 MANUAL A02-AP1-W54

Wireless Multi-Function Access Point
A02-AP1-W54 Pag. 32
 WPA-PSK / WPA2-PSK: If WPA-PSK or WPA2-PSK is selected, user needs
to set the key in the passphrase field as the below screen. The key length
should be 8 characters at least.
 Apply: For the changes made to any of the items above to be effective, click
“Apply”. The new settings are now been saved to Access Point and will be
effective once the Access Point restarts.
You must make sure that the SSID, Encryption and Channel is set the
same as that AP you wish to connect.
When WDS is enable only WEP ecryption is supported.