Wireless Multi-Function Access Point A02-AP1-W54 MANUAL A02-AP1-W54

Wireless Multi-Function Access Point
A02-AP1-W54 Pag. 36
2. Only allow PCs with MAC listed below to access device
3. Only deny PCs with MAC listed below to access device
The maximum number of MAC addresses that can be stored is 50. User can
browse through the MAC address saved by selecting the MAC Filter List.
For any changes made in the security page, click “Apply” for the changes to be
effective.
3.10 Tools
Four functions are provided in this page, Backup, Restore Settings, Restore
default settings and Firmware Upgrade.
 Save Settings to Local Hard Drive: Click on “Save Settings to Local Hard
Drive” button, which will open a FileSave Dialog box, where user gets to save
all the current settings and configurations to a file.
 Restore Settings: Click on the “Browse” button to open a FileOpen Dialog
box, where user gets to select the file, which saves previous settings and
configurations. Upon selecting the saved file, click “Restore” and complete
the restore process when the access point re-operates after it restarts.
 Restore to default settings: Click on “Default” button to restore the access
point back to its manufacture default settings.
 Firmware Upgrade: Click on the “Browse” button to open a FileOpen Dialog
box, where gets to select the firmware file, which download from the web for