Wireless Multi-Function Access Point A02-AP1-W54 MANUAL A02-AP1-W54

Wireless Multi-Function Access Point
A02-AP1-W54 Pag. 40
seconds, the LED of the WLAN will turn off. And when the
Access Point is ready, the WLAN LED will start blinking.
And the other function is when the AP is locked, press the
reset button to unlock it.
2
Before configurating thisWireless Multi-Function Access Point,
you need to know the following default settings.
Username: admin
Password : admin
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Wireless: SSSID= default, Channel=6, WEP=disable