Fast Ethernet Switch Layer 2 User's Guide

6
U
NPACKING AND
I
NSTALLATION
This chapter provides unpacking and setup information for
the Switch.
Unpacking
Open the shipping cartons of the Switch and carefully unpacks its
contents. The carton should contain the following items:
 One the 16(24)-port 10/100Mbps Fast Ethernet Switch
 One AC power cord, suitable for your area’s electrical power
connections

Four rubber feet to be used for shock cushioning

Screws and two mounting brackets

This User’s Guide (on CDRom or Floppy)
If any item is found missing or damaged, please contact your local
reseller for replacement.
Installation
The site where you install the Switch stack may greatly affect its
performance. When installing, consider the following pointers:
Install the Switch in a fairly cool and dry place. See Specifications
for the acceptable temperature and humidity operating ranges.
Install the Switch in a site free from strong electromagnetic field
generators (such as motors), vibration, dust, and direct exposure to
sunlight.
Leave at least 10cm of space at the front and rear of the hub for
ventilation.