User`s guide
6
Features
16×10/100Mbps Auto-negotiation Ethernet ports
All ports support auto MDI/MDIX, so there is no need
to use cross-over cables or an up-link port
Full/half duplex transfer mode for each port
Wire speed reception and transmission
Store-and-Forward switching scheme capability to
support rate adaptation and ensure data integrity
Broadcast storm protection
Up to 4K unicast addresses entities per device, self-
learning, and table aging
256KBytes on-chip packet buffer for each eight ports
Supports IEEE 802.3x flow control for full-duplex
mode ports
Supports Back-pressure flow control for half-duplex
mode ports
Optional one port 100BASE-FX Fiber module in the
rear panel for length extension
Supports Port-base VLAN and IEEE 802.1p QoS
RS-232 DCE console port for setting up and manage
the Switch via connection to a console terminal or PC
using a terminal emulation program