User`s guide

15
C
ONFIGURATION
This Switch is an unmanaged, but “smart” Switch because
programmable administration parameters make
the Switch operate more effectively than
unmanaged (dumb) switches. This chapter will
describe how to configure the Switch.
Console Port (RS-232 DCE)
The console configuration requires connecting a terminal, such as
a Workstation or a PC running a terminal
emulation program (such as HyperTerminal,
which is automatically installed with Microsoft
Windows) a to the RS-232 DCE console port of
the Switch.
The console port is set at the factory for following configuration:
Baud rate: 9,600
Data width: 8 bits
Parity: none
Stop bits: 1
Flow control: None
Make sure the terminal or PC you are using to make this
connection is configured to match these settings.
.