NetCamera IP Security Wireless Camera User Manual A02-IPCAM-W54

IP Wireless Security
Camera
A02-IPCAM-W54_ME01
10
Link LED
The Link LED is positioned on the right side of the IP Security Wireless Camera’s lens while facing
the IP Security Wireless Camera. It is located right of the Power LED
A steady orange light confirms that the camera has good connection to LAN connectivity.
Dependent on the data traffic the LED will begin to flash to indicate that the IP Security Wireless
Camera is receiving/sending data from/to the network.
4.2 Rear Panel
Network Cable Connector
The IP Security Wireless Camera’s rear panel features an RJ-45 connector for connections to
10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5
twisted-pair cable). The port supports the NWay protocol, allowing the IP Security Wireless
Camera to automatically detect or negotiate the transmission speed of the network.