NetCamera IP Security Wireless Camera User Manual A02-IPCAM-W54

IP Wireless Security Camera
A02-IPCAM-W54_ME01 1
8.3.2 Configuration
The Configuration window contains commands for settings that are required to input key details to
setup the camera for operation. Click Configuration in the top menu bar and the Configuration
System
Click the System item in the left column to setup the basic configuration of your camera.
-System Setting: In this field, you can configure the basic information of your camera.
• Camera Name: This field is used to enter a descriptive name for the device. The default setting
for the Camera Name is IP Security Wireless Camera. The maximum length is 32 (printable
ASCII).
• Location: This field is used to enter a descriptive name for the location used by the camera
(optional).
• Admin: This field is used to enter the administrator name along with the password to access the
System Administration settings. Be sure to enter the password twice to confirm the details once
in the Admin Password field and again in the Confirm Password field. The default setting for
administrator is blank space (Null String), and you need to key in the administrator name with a
maximum length of 12 (printable ASCII) characters and enter the administrator password with a
maximum length of 8 (printable ASCII) characters. It is highly recommended to set the Admin ID