NetCamera IP Security Wireless Camera User Manual A02-IPCAM-W54

IP Wireless Security Camera
A02-IPCAM-W54_ME01 40
Question Answer
What is the wireless
transmission range for
the IP Security Wireless
Camera?
Generally the wireless distance can go up to 100 meters
indoors and up to 300 meters outdoors. The range is
limited by the number of walls, ceilings, or other objects
that the wireless signals must pass through. Typical
ranges vary depends on the types of materials and
background Radio Frequency (RF) noise in your home
or business and the configuration setting of your network
environment.
Question Answer
Can the IP Security
Wireless Camera be
used out-doors?
The IP Security Wireless Camera is not weatherproof. It
needs to be equipped with a weatherproof case to be used
outdoors and it is not recommended.
Question Answer
What network cabling is
required for the IP
Security Wireless
Camera?
The IP Security Wireless Camera uses Category 5 UTP cable
allowing 10 Base-T and 100 Base-T networking
Question Answer
Can the IP Security
Wireless Camera be
setup as a PC-cam on
the computer?
No, the IP Security Wireless Camera is an IP Security
Wireless Camera used only on Ethernet and Fast Ethernet
network and supported by wireless transmission.
Question Answer
Can the IP Security
Wireless Camera be
connected on the
network if it consists of
only private IP
addresses?
The IP Security Wireless Camera can be connected to LAN
with private IP addresses.
Question Answer
Can the IP Security
Wireless Camera be
installed and work if a
firewall exists on the
network?
If a firewall exists on the network, port 80 is open for ordinary
data communication. However, since the IP Security
Wireless Camera transmits image data, the default port 8481
is also required. Therefore, it is necessary to open port 8481
of the network for remote users to access the IP Security
Wireless Camera.