NetCamera IP Security Wireless Camera User Manual A02-IPCAM-W54

IP Wireless Security Camera
A02-IPCAM-W54_ME01 45
Appendix C
Xplug Control Installation
Installation To Web Server
It is highly recommended to install the Xplug Control application to the Web
Server for IE 5.0. It must be installed to a Public Domain with Fixed IP address.
1. Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2. Setting (Configuration):
From the Web Configuration menu select “System” and under the “Loading ActiveX From” input
web server location
(http://www.web server location.com/
).
Once the settings are completed, the user now is able to access the IP Security Wireless Camera from
the web browser by selecting the image view – ActiveX mode.
Installation To Local PC
Insert the CD-ROM into the CD-ROM drive to initiate the auto-run program. Once completed, a menu
screen will appear as below:
To install Xplug Control, click the "Xplug Control" button to activate the installation procedure for the
plug-in program.
Once executed, a prompt will appear requesting the input of the desired language selection. Make the
desired selection and click “OK” to continue.
The Welcome screen will appear. Click the “Next” button to proceed with the installation.