NetCamera IP Security Wireless Camera User Manual A02-IPCAM-W54

IP Wireless Security Camera
A02-IPCAM-W54_ME01 47
Appendix D
Adjust IP Security Wireless Camera
Focus
To adjust the focus of the lens, you need to turn the lens slowly in either clockwise or anti-clockwise
direction until the desired image appears. DO NOT over turn the lens in either of the directions as it will
be out of focus.
You can further adjust the IP Security Wireless Camera's image quality through
System Administration – Image of Web Configuration. Please refer to Web
Configuration section for further details.
Direct exposure to sunlight may cause permanent damage to the CMOS sensor.
Therefore do not expose the IP Security Wireless Camera’s lens directly to
sunlight. When operation is required in glaring light environment, it is
recommended to use an iris lens.
The IP Security Wireless Camera is designed for indoor usage and if your
application requires prolong exposure to sunlight, a sun visor is recommended to
protect the IP Security Wireless Camera.