NetCamera NV IP Security Night Vision Camera A02-IPCAM3 MANUAL A02-IPCAM3_ME01 Where solutions begin ISO 9001:2000 Certified Company
NetCamera NV ITALIANO Questo prodotto è coperto da garanzia Atlantis Land Fast-Swap della durata di 3 anni. Per maggiori dettagli in merito o per accedere alla documentazione completa in Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 3 years Fast-Swap warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using this device, please refer to the online manual.
NetCamera NV The award of the information is facultative, but its lack will prevent ATLANTIS LAND® from starting the Guarantee process requested. R R Reeegggiis issttteeerrryyyooouuurrrppprrroooddduuucccttt!!! w w w w m ww ww w..a .aatttlla laannntttiis iss---lla laannnddd..c .ccooom m Registration on the web site www.atlantis-land.
NetCamera NV INDEX Chapter 1 ...................................................................................................... 9 1.1 An Overview of NetCamera NV .............................................................. 9 1.2 System Requirements............................................................................. 9 1.3 Package Contents................................................................................. 10 Chapter 2 ..............................................................
NetCamera NV 4.2.1 FTP ......................................................................................... 42 4.2.2 Mail.......................................................................................... 44 4.2.3 GPIO ....................................................................................... 46 4.2.4 TCP Message ......................................................................... 47 4.2.5 Breach Manager......................................................................
NetCamera NV Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land SpA.
NetCamera NV CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE in which Countries where the product may be used freely: Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland. France: except the channel 10 through 13, law prohibits the use of other channels.
NetCamera NV Chapter 1 Introduction This manual is think for an advanced utilization of NetCamera NV; for this reason, you can find explanation of any functions supported by product. For fast configuration, please referee to Quick Start Guide. 1.1 An Overview of NetCamera NV NetCamera NV is the ideal solution for sending videos, remote video surveillance and for the transmission of images in real-time over your Intranet or the Internet.
NetCamera NV Local Area Network: 10Base-T Ethernet or 100Base TX Fast Ethernet CPU: Intel Celeron 1.5GHz or above (Intel Pentium 4 is preferred) Memory Size: 128 MB (256 MB recommended) VGA card resolution: 800x600 or above Internet Explorer 5.0 or above (ActiveX) 1.3 Package Contents Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible.
NetCamera NV Chapter 2 Using NetCamera NV 2.1 Cautions for NetCamera NV Read this section to learn how to set up your IP camera and use its basic functions. Do not place the NetCamera NV under high humidity and high temperature. It can damage the device. Do not use the same power source for NetCamera NV with other equipment. Do not open or repair the case yourself. If the NetCamera NV is too hot, turn off the power immediately and have a qualified serviceman repair it.
NetCamera NV 2.
NetCamera NV Night Vision Furthermore, thanks its 8 integrated Infrared sensors, the NetCamera NV’s automatic Day/Night functionality will change to Infrared mode as it becomes dark Light Sensor Light Sensor (Don’t cover this Led) Microphone Microphone for environmental sound recording Use of audio or video equipment for recording the image or voice of aperson without their knowledge and consent is prohibited in certain states orjurisdictions.
NetCamera NV 2.
NetCamera NV DC-IN Connect the Power Adapter DC plug to the AP’s power jack Please check the attached pircture in order to obtain more info about GPIO port.
NetCamera NV 2.4 Assembling the Stand and Connecting to a Network The camera can be assembled in two different ways; either from the top of the unit or the bottom. Assemble the stand and fix it to the cam-era as shown. Use the three screws and plugs provided to fix the stand bracket to a wall, ceiling or other convenient fixing point. The stand can be adjusted to allow the camera a full 360º of rotation and a pan and tilt action.
NetCamera NV The IP camera can be connected to an Ethernet network using the RJ-45 port as shown. Connect the camera to an Ethernet hub or switch using a standard cable. You can also connect the camera directly to a computer using the supplied cable. Use only the power adapter with the camera. Using another adapter, not recommended by the manufacturer, may damage the camera and invalidate the warranty.
NetCamera NV Chapter 3 Configuration The NetCamera NV can be configured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface for configuration. 3.1 Before Configuration This section describes the configuration required by LAN-attached PCs that communicate with theNetCamera NV, either to configure the device or for network access.
NetCamera NV 3.1.1 Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. 3. Click Properties. 4. Select the IP Address tab. In this page, click the Specify an IP address radio button (EG IP=192.168.1.2 and subnet Mask=255.255.255.0). 3.1.2 Windows NT4.0 1. Go to Start / Settings / Control Panel.
NetCamera NV 3.1.4 Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Use the following IP address radio buttons (EG IP=192.168.1.2 and subnet Mask=255.255.255.0). 6. Click “OK” to finish the configuration. 3.
NetCamera NV 3.3 Browser configuration Open the web browser, enter the local port IP address of this NetCamera NV, which default at 192.168.1.1, and click “Go” to get the login page.
NetCamera NV Please refer to the appendix on how to install ActiveX. • At the top click This site might require the following ActiveX Control: ´ATL3.0:VCView´ from ´Atlantis Land SpA ´. Click here to install.... • Click Install ActiveX Control.... • In the Security Warning window click Install. • The live video will now be streamed.
NetCamera NV For more detailed instructions on configuring and usingthe NetCamera NV, please refer to the online manual. The computer’s IP address must correspond with the camera’s IP address in the same segment for the two devices to communicate (E.G. IP=192.168.1.2 and Subnet Mask=255.255.255.0).
NetCamera NV Chapter 4 Advanced Configuration Read this chapter to learn how to operate the IP camera and take advantage of the advanced features such as alerting, and ftp transfers. Open the web browser, enter the local port IP address of this NetCamera NV, which default at http://192.168.1.1, and click “Go” to get the login page. Enter your User Name and password. The default are admin / atlantis. Please refer to the appendix on how to install ActiveX.
NetCamera NV To access the settings menus, do the following: Click the button on the menu sidebar. A login prompt appears: The computer’s IP address must correspond with the camera’s IP address in the same segment for the two devices to communicate. If you are denied to enter the Web Configuration Utility, the following warning message will appear on the screen. Please try to enter the correct username and password again, or contact your network administrator.
NetCamera NV There are 3 sub menus in the menu sidebar: Home, Basic Setting and Advanced Setting.
NetCamera NV 4.1 Basic Settings Read this section to learn about all the settings and options under the Basic Setting sub menu. There are five main screens, accessed via the tabs at the top of the screen: • System • Network • User • Video • Monitor 4.1.1 System The System submenu allows you to configure all system-related settings.
NetCamera NV Configuration Click the Configuration tab to access the configuration status screen: Here is displayed all system information, including firmware ver-sion and device name, and is where you can configure date and time options. Choose to either Sync with Time Server or Sync with PC Time. Check the radio button for the setting you wish to use.If you select Sync with Time Server, choose your time zone, enter NTP server details, along with another server if neces-sary.
NetCamera NV If You meet problems, please follow these instructions: NTP Server=pool.ntp.org or 128.138.140.44 NTP Server=192.5.41.40 Click the Submit button to save your settings and to update the system date and time.
NetCamera NV Firmware Click the Firmware tab to access the firmware upgrade screen: Here you can upgrade the system firmware version. Click the Sfoglia(Browse) button and locate the folder where the firmware update is stored. Click the Upgrade button to upgrade the firmware. Do NOT upgrade firmware on any Atlantis Land product over a wireless connection. Failure of the device may result. Use only hardwired network connections.
NetCamera NV Please pay attention. In case electrical shutdown, during this procedure, this product could be not usable. When uploading software to theNetCamera NV, it is important not to interrupt the Web browser by closing the window or loading a new page. If the browser is interrupted, it may corrupt the software.
NetCamera NV Others Here you can reset and restore original camera settings. Click the Restore to Factory Default button to reset all parameters to original factory settings. Click the Remote Reboot button to restart the camera.
NetCamera NV 4.1.2 Network The Network submenu allows you to configure all system-related settings.
NetCamera NV Ethernet Click the Ethernet tab to access the ethernet settings screen: Here you can configure all settings related to your Ethernet and DNS & HTTP port setup. Under IP Setting and DNS Configuration, either enter the settings manually or select the DHCP radio button to obtain the addresses via DHCP. Click the Submit button to save your settings. HTTP Port: This is the port number the router’s embedded web server (for web-based configuration) will use.
NetCamera NV PPPoE Click the PPPoE tab to access the PPPoE settings screen: Here you can configure all PPPoE connection settings.If you connect to your network via PPPoE, check the Enable PPPoE checkbox and enter your User Name, password and MTU. Click the Submit button to save all changes. The system will begin to connect via PPPoE. Status details are displayed under Status.
NetCamera NV Dynamic DNS client can works correctly only if PPPoE is activated.
NetCamera NV DDNS Click the DDNS tab to access the DDNS settings screen: Here you can configure all DDNS connection settings. Go to www.dyndns.org to register a domain name and obtain a username and password. Enter this domain name, username, and password in the DDNS settings screen. Click the Submit button to save your settings. When the IP address of the camera changes, it will update its new address to DDNS automatically and the camera can be contacted using a domain name instead of an IP address.
NetCamera NV 4.1.3 User The User submenu enables you to set up users and administra-tors for the system. Under User Authorization, check Enable User Check if you wish to run a login process every time you access the system. Click the Submit button to confirm this setting. Under Add/ Modify User, enter a new username and password in the required fields to create new user names. Assign each user to either the admin or user groups. Click the submit button to confirm the new setting.
NetCamera NV 4.1.4 Video The Video submenu enables you to configure all video settings: Under Profile & Options, you can alter various options: • Camera Location: Enter the camera location. Click the Submit button to confirm this setting. • Display Options: Check the checkbox to show the date, time, and camera location on the display screen. • Image Flip: Check to rotate the display image 180 degrees.
NetCamera NV • Frame Rate: Enter the required frame rate. Click the Submit button to confirm this setting. Under Image Parameters, you can alter image output options. Select the image compression rate, and resolution you require from the dropdown boxes. Make any adjustments for brightness, contrast, saturation, sharpness, hue and gamma of the image using the + or - buttons. Under Audio Parameters, check the checkbox to turn audio on or off.
NetCamera NV 4.1.5 Monitor The 4-port monitor setting screen appears: Enter the IP address, port, login and password of each camera you wish to view and check the Enable checkbox. Click the Submit button to confirm your settings. Click the Home tab on the menu sidebar to return to the main screen, then click the 4Port Viewer to switch to 4-port viewing mode.
NetCamera NV 4.2 Advanced The camera will function fine after the Basic configuration, however, you may wish to explore more advanced options. This section explains each parameter and setting procedures for advanced configuration of the camera. Move your mouse onto the Advanced button, and it will automatically pop up a submenu bar as below. 4.2.
NetCamera NV All uploade files on FTP are in .jpg format.
NetCamera NV 4.2.2 Mail The Mail submenu enables you to configure all mail server set-tings: When mail alerting is enabled, the camera sends a still image to a specified email address every time the alert is triggered (see “Breach Manager” for details on how to activate this option). Enter your mail server address, mail sender address, and mail receiver address (username and password for authentication). Click the Submit button to save all changes.
NetCamera NV
NetCamera NV 4.2.3 GPIO The GPIO submenu enables you to configure all DI sensor and DO settings: External DI sensors can be attached via the GPIO port at the rear of the camera. The external sensor can be normally open, or normally closed. A normally open sensor is like an open switch that closes when triggered. A normally closed sensor is like a closed switch that opens when triggered. This must be set correctly for an external sensor to function properly.
NetCamera NV 4.2.4 TCP Message The Tcp Message submenu enables you to configure all tcp message settings: Enter the Server IP address, port and message subject. Check the Enable checkbox and click the Submit button to confirm all settings.
NetCamera NV 4.2.5 Breach Manager The Breach Manager submenu enables you to configure all breach alert and motion detection settings: You can configure the system to capture images when either the motion sensors, DI1 or DI2 sensors are activated. To set a breach alert, do the following: • Select a breach ID from the dropdown menu and enter the duration of the alert. You can configure up to five separate alerts at any one time.
NetCamera NV The Status window lists all configured alert details; the first column lists the alarm trigger type, the second lists the action type, and the third displays whether the alert is enabled or disabled.
NetCamera NV Chapter 5 Support 5.1 Support If you have any problems with the IP Night Vision Camera, please consult this manual. If you have any other questions you can contact the Atlantis Land company directly at the following address: Atlantis Land SpA Viale De Gasperi, 122 20017 Mazzo di Rho(MI) Tel: +39. 02.93906085, +39. 02.93907634(help desk) Fax: +39. 02.93906161 Email: info@atlantis-land.com or tecnici@atlantis-land.com WWW: http://www.atlantis-land.
NetCamera NV APPENDIX A: Frequently Asked Questions A.1 Using LEDs to Diagnose Problems The LEDs are useful aides for finding possible problem causes. A.1.1 LED Power The PWR LED on the front panel does not light up. Steps CORRECTIVE ACTION Make sure that the NetCamera NV’s power adaptor is 1 connected to the Access Point and plugged in to an appropriate power source. Use only the supplied power adaptor.
NetCamera NV A.2 WEB I cannot access the web configurator. Steps CORRECTIVE ACTION Make sure you are using the correct IP address of the 1 NetCamera NV. Check the IP address of the NetCamera NV (192.168.1.1). The web configurator does not display properly. Steps CORRECTIVE ACTION Make sure you are using Internet Explorer 5.0 and later 1 versions. Make sure you are using Internet Explorer 5.0 and ActiveX is 2 installed. Delete the temporary web files and log in again.
NetCamera NV A.4 General Questions Question What is an IP Security Night Vision Camera? The IP Security Night Vision Camera is a standalone system Answer connecting directly to an Ethernet or Fast Ethernet network. It is different from the conventional PC Camera, the IP Security Night Vision Camera is an all-in-one system with built-in CPU and web-based solutions providing a low cost solution that can transmit high quality video images for monitoring.
NetCamera NV Question Answer Question Answer Question Answer Question Answer What network cabling is required for the IP Security Night Vision Camera? The IP Security Night Vision Camera uses Category 5 UTP cable allowing 10 Base-T and 100 Base-T networking. Can the IP Security Night Vision Camera be setup as a PCcam on the computer? No, the IP Security Night Vision Camera is an IP Security Night Vision Camera used only on Ethernet and Fast Ethernet network.
NetCamera NV APPENDIX B: Trouble Shooting This chapter covers potential problems and the corresponding remedies. Question I cannot access the IP Security Night Vision Camera from a web browser. Answer The possible cause might be the IP Address for the IP Security Night Vision Camera is already being used by another device. To correct the possible problem, you need to first disconnect the IP Security Night Vision Camera from the network. Then run the PING utility.
NetCamera NV Address of the IP Security Night Vision Camera is within the same subnet as your workstation. Click “Start”, “Setting”, “Control Panel”, and the “Network” icon. Select TCP/IP from the “Network” dialog box and from the “TCP/IP Properties” dialog box click “Specify an IP address”. If the IP Security Night Vision Camera is situated on a different subnet than your workstation, you will not be able to set the IP address from this workstation.
NetCamera NV Question Answer Question Answer Why does the Link LED not light up properly? • There might be a problem with the network cable. To confirm that the cables are working, PING the address of a know device on the network. If the cabling is OK and your network is reachable, you should receive a reply similar to the following (…bytes = 32 time = 2 ms). • The network device utilized by the IP Security Night Vision Camera is not functioning properly such as hubs or switches.
NetCamera NV Question Answer There is poor image quality, how can I improve the image? • A probable cause might be the incorrect display properties configuration for your desktop. You need to open the Display Properties on your desktop and configure your display to show at least 65’000 colors for example at least 16-bit. • Applying only 16 or 256 colors on your computer will produce dithering artifacts in the image. • The configuration on the IP Security Night Vision Camera image display is incorrect.
NetCamera NV APPENDIX C: Adjusting the Camera Focus To help you get the best image quality, keep in mind that while adjusting the NetCamera NV (Adjust by turning clockwise or counter-clockwise )focus you can preview the image quality from your Web browser. You can further adjust the image quality through the Web Configuration under Setup->Basic->Video. Please refer to section 4.1.4 for further details. Direct exposure to sunlight may cause permanent damage to the device.
NetCamera NV APPENDIX D: GPIO Its back panel contains 3 pairs of connectors (2 input and 1 output) allowing the camera to communicate with different elements of a building, such as electric doors and light switches or security related devices such as alarms. Most of its applications are security. Warnings to the one break into house/building. Some people user it to setting fire alarms. NetCamera NV supports 2 sensors in (DI) and 1 alarm out (DO).
NetCamera NV
NetCamera NV A normally open sensor (NO/COM ) is like an open switch that closes when triggered. In this case the Motion Detection switch on a spot. Please check the maximum Voltage/Ampere (DO): Max 24VDC/1A Max 125VAC /0.
NetCamera NV For example, entrance guarding (DO)
NetCamera NV For example, entrance guarding (DO and DI)
NetCamera NV
NetCamera NV APPENDIX E: Glossary of Terms NUMBERS 10BASE-T 10BASE-T is Ethernet over UTP Category III,IV, or V unshielded twisted-pair media. 100BASE-TX The two-pair twisted-media implementation of 100BASE-T is called 100BASE-TX. 802.11g An IEEE standard for wireless local area networks. It offers transmissions speeds at up to 54 Mbps in the 2.4-GHz band. A Access point It is the hardware interface between a wireless LAN and a wired LAN.
NetCamera NV B BOOTP Bootstrap Protocol is an Internet protocol that can automatically configure a network device in a diskless workstation to give its own IP address. C Communication Communication has four components: sender, receiver, message, and medium. In networks, devices and application tasks and processes communicate messages to each other over media. They represent the sender and receivers. The data they send is the message. The cabling or transmission method they use is the medium.
NetCamera NV DNS Domain Name System is an Internet service that translates domain names into IP addresses. Since domain names are alphabetic, they're easier to remember. The Internet however, is really based on IP addresses every time you use a domain name the DNS will translate the name into the corresponding IP address. For example, the domain name www.network_camera.com might translate to 192.167.222.8.
NetCamera NV intranet pass through the firewall, which examines each message and blocks those that do not meet the specified security criteria. G Gateway A gateway links computers that use different data formats together. Group Groups consist of several user machines that have similar characteristics such as being in the same department. H HEX Short for hexadecimal refers to the base-16 number system, which consists of 16 unique symbols: the numbers 0 to 9 and the letters A to F.
NetCamera NV that identifies it to the other nodes. All Internet addresses are IP addresses IP Internet Protocol is the standard that describes the layout of the basic unit of information on the Internet (the packet) and also details the numerical addressing format used to route the information. Your Internet service provider controls the IP address of any device it connects to the Internet. The IP addresses in your network must conform to IP addressing rules.
NetCamera NV LAN Local Area Network a computer network that spans a relatively small area sharing common resources. Most LANs are confined to a single building or group of buildings. N NAT Network Address Translator generally applied by a router, that makes many different IP addresses on an internal network appear to the Internet as a single address. For routing messages properly within your network, each device requires a unique IP address. But the addresses may not be valid outside your network.
NetCamera NV specific IP address is accessible. It functions by sending a packet to the specified address and waits for a reply. It is primarily used to troubleshoot Internet connections. PPPoE Point-to-Point Protocol over Ethernet. PPPoE is a specification for connecting the users on an Ethernet to the Internet through a common broadband medium, such as DSL or cable modem. All the users over the Ethernet share a common connection.
NetCamera NV Router A router is the network software or hardware entity charged with routing packets between networks. S Server It is a simple computer that provides resources, such as files or other information. SMTP The Simple Mail Transfer Protocol is used for Internet mail. SNMP Simple Network Management Protocol. SNMP was designed to provide a common foundation for managing network devices. In LANs, a station consists of a device that can communicate data on the network.
NetCamera NV 2 or 10BASE-T networks to attach devices with AUI ports. U UDP The User Datagram Protocol is a connectionless protocol that resides above IP in the TCP/IP suite ULP The upper-layer protocol refers to Application Layer protocols such as FTP,SNMP, and SMTP. User Name The USERNAME is the unique name assigned to each person who has access to the LAN. Utility It is a program that performs a specific task. UTP Unshielded twisted-pair. UTP is a form of cable used by all access methods.
NetCamera NV Workstations Workstation refers to the intelligent computer on the user’s desktop. This computer may be an Intel-based PC, a Macintosh, or a UNIX-based workstation. The workstation is any intelligent device a user works from.
NetCamera NV APPENDIX F: Technical Features TECHNICAL FEATURES CMOS Sensor Number of effective pixels: 307200 pixels (VGA) Resolution: 640 x 480 pixel Lens Type: C3 Mount Lens (removable) Focal length: f=3.6mm F-number: F2.
NetCamera NV System Requirements Local Area Network: 10Base-T Ethernet or 100Base TX Fast Ethernet CPU: Intel Celeron 1.5GHz or above (Intel Pentium 4 is preferred) Memory Size: 128 MB (256 MB recommended) VGA card resolution: 800x600 or above Internet Explorer 5.
NetCamera NV
Atlantis Land S.p.A. Viale De Gasperi, 122 Mazzo di Rho – MI – Italy info@atlantis-land.com sales@atlantis-land.
