NetCamera Quick Start Guide

Package contents
System requirements
The product
Before proceed with the product usage please check the package contents:
-IP Camera
-Power supply
-Mounting bracket
-Quick Start Guide
-CD-ROM
Configuration
Turn on your PC and put the provided CD-Rom in your CD-Rom reader. A welcome
page will appear. Select the purchased NetCamera and click on “Intelligent IP
Installer” link, then follow the next steps.
1 .Click ” ” to proceed with the installation procedureYes
-1- -2 -
-4--3-
2. Select desired language an click ”Next”
3. Click to go to the next step"Next”
4 .Click to go to the next step"Next” 5.Click togotothenextstep"Next”
6 .Click to go to the next step"Next” 7 .Click ” ” then to complete
the installation procedure.
Install “Finish”
Before proceed with product installation, please make sure your system is in
compliance with the following requirements:
-Windows 98, ME, 2000, 2003, XP or Vista
-Internet Explorer 6.0 or later
QUICK START GUIDE
A02-IPCAM5_GE01
www.atlantis-land.com
NetCamera 500
A02-IPCAM5
Focus
Bracket
Microphone
Audio output
Bracket mounting hole
Reset
Network
Power