Specifications

69
Direction
Select the access to the Internet (“Outgoing”) or from the
Internet (“Incoming”) or Both
IP Filter Rule Editing
IP Filter Rule Index
This is item number
Rule Type
Select Yes from the drop down list box to enable IP filter
rule
Active
The source IP address or range of packets to be monitored
Source IP Address
It is the destination IP addresses based on above
destination subnet IP
Subnet Mask
(Source)
This Port or Port Ranges defines the port allowed to be
used by the Remote/WAN to connect to the application.
Default is set from range 0 ~ 65535. It is recommended
that this option be configured by an advanced user
Port Number (Surce)
This is the destination subnet IP address
Destination IP
Address
It is the destination IP addresses based on above
destination subnet IP
Subnet
Mask(destination)
It is the packet protocol type used by the application,
select either TCP or UDP or ICMP
Port
Number(destination)
Select action for the traffic unmatching current rule;
Forward to leave it pass through, and NEXT to check it by
the next rule
Protocol
This is item number
Rule Unmatched
Select Yes from the drop down list box to enable IP filter
rule
IP Filter Listing
#
Item number
Active
Whether the connection is currently activ
Source IP Mask
The source IP address or range of packets to be monitored
Destination IP Mask
This is the destination subnet IP address
Source port
This Port or Port Ranges defines the port allowed to be
used by the Remote/WAN to connect to the application.
Default is set from range 0 ~ 65535. It is recommended
that this option be configured by an advanced user
Destination Port
This is the Port or Port Ranges that defines the application
Protocol
It is the packet protocol type used by the application,
select either TCP or UDP or ICMP