VoIP ROUTER ADSL A02-RAV211 USER’S MANUAL A02-RAV211_ME01
VoIP ROUTER ADSL Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
VoIP ROUTER ADSL TABLE OF CONTENTS CHAPTER 1 ............................................. 1 1.1 AN OVERVIEW OF THE VOIP ROUTER ADSL.................................................................................. 1 1.2 PACKAGE CONTENTS ...................................................................................................................... 2 1.3 VOIP ROUTER ADSL FEATURES..................................................................................................... 2 1.
VoIP ROUTER ADSL 3.6.3.3.4 ADVANCED TELEPHONY SETTINGS ...................................................................................... 35 3.6.3.3.5 RING & TONE CONFIGURATION ........................................................................................... 38 3.6.3.3.7 TIMEOUTS ............................................................................................................................ 39 3.6.3.4 SYSTEM ..........................................................................
VoIP ROUTER ADSL Chapter 1 Introduction 1.1 An Overview of the VoIP Router ADSL A02-RAV211 VoIP ADSL Modem/Router provides a high-speed Ethernet port for high-speed Internet browsing. It can support downstream transmission rates of up to 8Mbps and upstream transmission rates of up to 1024Kbps. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.lite (G992.2); G.hs (G994.1)).
VoIP ROUTER ADSL dedicated local web server, even though the server now has a different IP address. In this example, the product is on the Internet and vulnerable to attacks, but the server is protected. Virtual Server can also be used to re-task services to multiple servers. For instance, the product can be set to allow separated FTP, Web, and Multiplayer game servers to share the same Internet-visible IP address while still protecting the servers and LAN users from hackers.
VoIP ROUTER ADSL Universal Plug and Play (UPnP) and UPnP NAT Traversal: This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs from many different vendors. It makes network simple and affordable for users. UPnP architecture leverages TCP/IP and the Web to enable seamless proximity networking in addition to control and data transfer among networked devices. With this feature enabled, users can now connect to Net meeting or MSN Messenger seamlessly.
VoIP ROUTER ADSL 1.
VoIP ROUTER ADSL Chapter 2 Using VoIP Router ADSL 2.1 Cautions for using the VoIP Router ADSL Do not place the ADSL VoIP Router under high humidity and high temperature. Do not use the same power source for ADSL VoIP Router with other equipment. Do not open or repair the case yourself. If the ADSL VoIP Router is too hot, turn off the power immediately and have a qualified serviceman repair it. Place the ADSL VoIP Router on a stable surface. Only use the power adapter that comes with the package.
VoIP ROUTER ADSL PORT Meaning Power Switch A Power ON/OFF switch Power Jack Connect the supplied power adapter to this jack. Reset Press it to restore the factory default setting back. VoIP Connect the RJ-11 cable to this port when connecting to the phone set. LAN (RJ-45 connector) Connect the supplied Ethernet cable to this port when connecting to a NIC (Network Interface card) in PC. Connect an UTP Ethernet cable to this port when connecting to a LAN such as an office or home network. 2.
VoIP ROUTER ADSL Chapter 3 Configuration The ADSL VoIP Router can be configured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface for configuration. 3.
VoIP ROUTER ADSL 3.3 Configuring PC in Windows For Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. 3. 4. Click Properties. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button.
VoIP ROUTER ADSL 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration.
VoIP ROUTER ADSL For Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click “OK”.
VoIP ROUTER ADSL For Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties.
VoIP ROUTER ADSL 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click “OK” to finish the configuration.
VoIP ROUTER ADSL For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties.
VoIP ROUTER ADSL 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 6. Click “OK” to finish the configuration.
VoIP ROUTER ADSL 3.4 Factory Default Settings Before configurating this ADSL VoIP Router, you need to know the following default settings. • Username: admin • Password : atlantis • IP Address : 192.168.1.254 • Subnet Mask : 255.255.255.0 • DHCP server is enabled. 3.4.1 Username and Password The default username and password are admin and atlantis respectively. If you ever forget the password to log in, you may press the RESET button to restore the factory default settings.. 3.4.
VoIP ROUTER ADSL LAN Port WAN Port IP address 192.168.1.254 Subnet Mask 255.255.255.0 DHCP server function Enabled N/A 3.5 Information from the ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA. Gather the information as illustrated in the following table and keep it for reference.
VoIP ROUTER ADSL You will get a status report web page when login successfully. At the configuration homepage, the left navigation page where bookmarks are provided links you directly to the desired setup page, including: • • • Status (ADSL Status, LAN Status, PPP Status, Learned MAC Table, Routing Table, System Log, Security Log) Quick Start Configuration (WAN, LAN, VoIP, System, Firewall, Virtual Server, Advanced) Click on the desired item to expand the page in the main navigation page. 3.6.
VoIP ROUTER ADSL 3.6.1.1 Status – ADSL Status Displays the status of your ADSL connection. It will refresh every two seconds.
VoIP ROUTER ADSL 3.6.1.1.1 ADSL Status – WAN Status 3.4.1.1.
VoIP ROUTER ADSL 3.6.1.2 Status – LAN Status Displays the status of your Local Area Network (LAN) connection. 3.6.1.2.
VoIP ROUTER ADSL 3.6.1.3 Status- PPP Status Displays the status of your PPP connection. It will refresh every ten seconds. 3.6.1.4 Status- Learned MAC Table Aging Timeout: Enter the time period for the router to memorize MAC addresses.
VoIP ROUTER ADSL 3.6.1.5 Routing Table Display the current routing paths of A02-RAV211. 3.6.1.6 System Log Display the system logs cumulated till the present time. You can trace the historical information through this function.
VoIP ROUTER ADSL 3.6.1.7 Security Logs Display the information of security logs. If hacker attacks your sever, he will be isolated by the firewall function and the router will record related information. Hence, you know where the hacker comes from. 3.6.2 Quick Start If you use this device to access the Internet through the ISP, this web page is enough for you to configure this router to access the Internet and enable VoIP service without a problem. 3.6.2.1 ADSL Quick Start Please check Chapter 3.
VoIP ROUTER ADSL 3.6.2.2 VoIP Quick Start If you have a VoIP SIP account, you may configure it to enable this service. Please refer to the sections (VoIP configuration) below for more information. 3.6.3 Configuration When you click this item, you get following sub-items to configure A02-RAV211.
VoIP ROUTER ADSL 3.6.3.1 WAN The screens below contain settings for the WAN interface toward Internet. Select Adapter Select the item of PVCs you want to configure. Then, press the Submit button.
VoIP ROUTER ADSL Virtual Circuit Virtual Circuit: Enable/Disable the settings of this VC. Bridge: If you set this device to be bridge mode, select Enable; if not, please select Disable. IGMP: You can Enable or Disable this function.
VoIP ROUTER ADSL Encapsulation: There are eleven ways ─ PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA VC-Mux, PPPoA LLC, 1483 Bridged IP VC-Mux, 1483 Bridged IP LLC, 1483 Routed IP VCMux, 1483 Routed IP LLC, Classical IP over ATM, Native ATM ─ for the device to have a public IP address and then to access Internet. You have to check with your ISP about which way is adopted.VPI: Consult the telephone company to get the Virtual Path Identifier (VPI) number. The default value is 0.
VoIP ROUTER ADSL line for a predetermined period of time. You can input any number from 0 to 32767. The default value is 0 seconds. MRU: Maximum Receive Unit indicates the peer of PPP connection the maximum size of the PPP information field this device can be received. The default value is 1492 and is used in the beginning of the PPP negotiation. In the normal negotiation, the peer will accept this MRU and will not send packet with information field larger than this value.
VoIP ROUTER ADSL Device IP Address IP Address: Default at 192.168.1.254. This is the device IP address in LAN site. If you plan to change it to another IP address to a different range of IP subnet. Please make sure your PC is also located at the same IP subnet. Otherwise, you may not be able to access the router. Subnet Mask: Default at 255.255.255.0. DHCP Server DHCP Server: Check DHCP Server to enable the router to distribute IP Addresses, subnet mask and DNS setting to computers.
VoIP ROUTER ADSL 3.6.3.3 VoIP The screens below contain settings for the VoIP module. This will create the telephone like service in the Internet. Most of VoIP services are free when surfing in the Internet. Enable SIP Registration: Yes/No to register a SIP account in the SIP server or not. Service provider to use: Select the right setting for the service provider in use. Click on the link “Update Service Provider” in order to add, view, delete or modify your profiles.
VoIP ROUTER ADSL Registration Interval: specify the re-registration interval in seconds. Authentication Method: specify the authentication method, currently MD5 is supported only. Registrar Address: indicate the SIP registrar IP address RegistrarPort: specify the port of the SIP registrar on which it will listen for register requests from VoIP device. ProxyAddress: indicate the SIP proxy server IP address. ProxyPort: specify the port of the SIP proxy server on which it will listen for messages.
VoIP ROUTER ADSL Login account list: Allow to select the desired profile. New account name: Inser the name of a new account. UserID: This parameter holds the registration ID of the user within the SIP registrar. Password: This parameter holds the password used for authentication within SIP registrar. AuthorizationUserID: Same as UserID. DisplayName: This parameter will be appeared on the Caller ID. Login action: Select in this field the action for the selected profile: list, add, delete, edit. 3.6.3.3.
VoIP ROUTER ADSL SIP: Enable/Disable to use SIP as VoIP call signaling protocol. LocalSIPPort: Enter the local SIP port which device listens incoming request. (range from 5000 to 65535, default value is 5060) Start Media Port: It is known as RTP port, provide the based value from the media (RTP) ports that are assigned for various endpoints and the different call sessions that may exist within an endpoint.
VoIP ROUTER ADSL Abstract Description: indicate the purpose or useful information for this entry. Remote UserID: This is the UserID you want to contact. Refer UserID in VoIP -> Configuration -> UserID. IP Address / Domain: indicate remote user’s IP address or domain name if this remote user does not register in the SIP server. If remote user is registered in the SIP server, this field is related to the SIP server’s IP / Domain name. 3.6.3.3.
VoIP ROUTER ADSL CallReturn: Enable/Disable the call return feature. 3.6.3.3.4 Advanced Telephony Settings This section is for you to do some advanced settings to the VoIP ADSL Router.
VoIP ROUTER ADSL Configure Caller ID info: Modulation: This is Caller ID Modulation (Bell 202.V23). You can select between CID_BELL202 and CID_V23. Delay: Delay , in milliseconds , between the end of the first ring and beginning of the CID transmission. FSK AMP 0: FSK (Frequency-Shift Keying) is a method of transmitting digital signals. Logic 0 (low) frequency & logic 1(high) frequency are in an analog form. The VoIP device will convert them to FSK for transmission purpose.
VoIP ROUTER ADSL Echo Cancellation Tail Length: Setting the Tail Length. Configure DTMF Relay: DTMF (Dual Tone Multi Frequency). None: selecting none for sending DTMF tone in original audio form. RFC 2833: sending voice with RTP packets Configure Hook Flash Time: This parameter specifies the maximum time in mSec of Hook flash. For a Hook flash to be detected , there should be an on-hook followd by an off-hook within “ Hook Flash Max Time” mSec.
VoIP ROUTER ADSL 3.6.3.3.5 Ring & Tone Configuration This screen contains settings for creating different ring tone patterns. Working Country: This selection is a drop-down box, which allows user to select the country for which the VoIP device must work. When a country is selected, the country parameters are automatically displayed. Current supported countries are USA and UK.
VoIP ROUTER ADSL BusyTone: Defined by six fields, Frequency1, Frequency2, On Time1, Off Time1, On Time2, Off Time2. Frequency is given in hertz. Time is given in milliseconds. RingBackTone: Defined by six fields, Frequency1, Frequency2, On Time1, Off Time1, On Time2, Off Time2. Frequency is given in hertz. Time is given in milliseconds. CallWaitingTone: Defined by six fields, Frequency1, Frequency2, On Time1, Off Time1, On Time2, Off Time2. Frequency is given in hertz. Time is given in milliseconds.
VoIP ROUTER ADSL RedialTimer: indicate the time period through which the dial tone is heard once the phone is lifted off the hook. At the end of this period, if no digits have been pressed, VoIP device will start playing fast-busy tone. AlertTimer: indicate the time for which VoIP device will play the ring when an incoming call has arrived and phone is on-hook. After this time period, the VoIP device will stop the ring automatically and reject the incoming call.
VoIP ROUTER ADSL 3.6.3.4.1 Password In factory setting, the default password is atlantis, and that for user is also password. You can change the default password to ensure that someone cannot adjust your settings without your permission. Every time you change your password, please record the password and keep it at a safe place. Please note that the minimum input for password is 8 alphanumeric characters long.
VoIP ROUTER ADSL 3.6.3.4.3 Upgrade To upgrade the firmware of A02-RAV211, you should download or copy the firmware to your local environment first. Press the “Browse…” button to specify the path of the firmware file. Then, click “Upgrade” to start upgrading. When the procedure is completed, A02-RAV211 will reset automatically to make the new firmware work. 3.6.3.4.
VoIP ROUTER ADSL 3.6.3.5 Firewall User can decide to enable this firewall function including Packet Filter, Block Hacker Attack, and Block WAN request features for better security control or not. But be noted, it wastes network processor computation power. The performance will be lower about 10% to 15%. More firewall features will be added continually, please visit our web site to download latest firmware. 3.6.3.5.
VoIP ROUTER ADSL Outgoing packets. Incoming: Determine whether the rule is for outgoing packets or for incoming Active: Choose “Yes” to enable the rule, or choose “No” to disable the rule. Packet Type: Specify the packet type (TCP, UDP, ICMP or any) that the rule will be applied to. Select TCP if you want to scope for the connection-based application service on the remote server using the port number.
VoIP ROUTER ADSL If the DHCP server option is enabled, you have to be very careful in assigning the IP addresses of filtered private IP range in order to avoid conflicts because you do not know which PC in LAN is assigned to which IP address. The easiest and safest way is that the filtered IP address is assigned to specific PC that is not allowed to access outside resource such as Internet. You configure the filtered IP address manually to this PC, but it is still in the same subnet with the router. 3.6.3.
VoIP ROUTER ADSL access the network resources. There are few samples of hacker patterns implemented as below. - IP Spoofing - Ping of Death (Length > 65535) - Land Attack (Same source / destination IP address) - IP with zero length - Sync flooding - Smurf Attack (ICMP Echo with x.x.x.0 or x.x.x.255) - Snork Attack - UDP port loop-back - TCP NULL scan 3.6.3.5.4 Block WAN Request Check “Enable” if you want to exclude outside PING request from reaching on this router.
VoIP ROUTER ADSL 3.6.3.6 Virtual Server Being a natural Internet firewall, the ADSL Router protects your network from being accessed by outside users. When it needs to allow outside users to access internal servers, e.g. Web server, FTP server, E-mail server or News server, this product can act as a virtual server. You can set up a local server with specific port number that stands for the service, e.g. Web (80), FTP (21), Telnet (23), SMTP (25), POP3 (110), DNS (53), ECHO (7), NNTP (119).
VoIP ROUTER ADSL 3.6.3.7.1 ADSL Trellis: Default at Enabled. Handshake Protocol: Default at Autosense – G.dmt first. You can also choose other protocols, such as Autosense – T1.413 first, G.dmt/G.lite, T1.413, G.dmt, G.lite. Wiring Selection: Default at Tip/Ring. Select Auto or A/A1 if necessary. 3.6.3.7.2 DNS A Domain Name System (DNS) contains a mapping table for domain name and IP address. In the Internet, every host has a unique and friendly name such as www.yahoo.com and IP address.
VoIP ROUTER ADSL 3.6.3.7.3 Dynamic DNS With Dynamic DNS service, a domain name can be translated into a dynamic IP address, which is often issued by ISP for dial-up service. A local server, such as Web server, Email server or FTP server, can then be easily accessed without knowing the changing IP address. Check the “Enable” button to access the Dynamic DNS service. You may sign up Dynamic DNS service at http://www.dyndns.org and there you can also register domain names.
VoIP ROUTER ADSL addition to update periodically according to this period setting, A02-RAV211 will take the same action automatically whenever the assigned IP changes 3.6.3.7.4 NAT The NAT Configuration page allows the user to set the configuration for the Network Address Translation.
VoIP ROUTER ADSL Session Name status will be displayed at the middle of this page to show the corresponding Session Name with its IP address. Click Session Name Configuration, the following screen displays. Session Name: Enter the desired session name. Interface: This field allows the user to choose specific WAN interface (PVC or PPP Session) for NAT session. NAT allows only one entry (User IP) per session, NAPT allows many entries (User IPs) per session.
VoIP ROUTER ADSL 3.6.3.7.5 RIP RIP: Default is Disabled. Border Gateway: Default is Enabled. Supply Interval seconds: The default value is 30 seconds. Expire Timeout seconds: The default value is 180 seconds. Garbage Timeout seconds: The default value is 120 seconds.
VoIP ROUTER ADSL 3.6.3.7.6 Static Route If you have another router with a LAN-to-LAN connection, you may create a static routing on the router that is the gateway to Internet. Add: Click this button to add a new static routing. When you click this button, the next figure appears. Delete: Check the item you want to delete. Then, click the “Delete” button. Destination / Subnet Mask / Gateway Address: Fill in these fields required by this Static Routing function.
VoIP ROUTER ADSL 3.6.3.7.7 MISC Configuration HTTP server access: Default at Restricted. HTTP server port: Default at 80. FTP server: Default at Enabled. TFTP server: Default at Disabled. DMZ: Regarding the DMZ Host, it is a local computer exposed to the Internet. Therefore, an incoming packet will be checked by NAT algorithms in the ADSL Router, then passed to the DMZ host when the packet is not sent by hacker or not limited by the virtual server list. DMZ HOST IP: Enter the IP address of the DMZ host.
VoIP ROUTER ADSL IGMP Proxy: Default at Disabled. PPP Half Bridge: Default at Disabled. PPP reconnect on WAN access: Default at Disabled. Select Enabled if you want to automatically reestablish the PPPoE/PPPoA session when disconnected by ISP. UPnP: Enable/Disable the UpnP function, refer to the 3.6.3.7.8 Diagnostic Test As soon as you enter the test program, all tests will run automatically to diagnose the connection status of the device.
VoIP ROUTER ADSL If this test returns FAIL, please try the test again a few minutes after this test is completed. Since your DSL modem need a couple of seconds to a few minutes to establish the DSL connection depending on your phone line quality. If this test returns FAIL, make sure your phone line is connected to your DSL modem securely, and also check with your service provider to see if your service is activated. If this test returns FAIL, all other tests will be skipped.
VoIP ROUTER ADSL service provider. If this test returns FAIL consistently and your DSL modem is statically assigned an IP address, make sure the IP address is the correct one assigned by your service provider. This test returns SKIPPED if “Ethernet connect to AAL5” test does not return PASS. Test Internet connection This test returns PASS if the gateway can be reached through ping request.
VoIP ROUTER ADSL Chapter 4 Troubleshooting If the VoIP ADSL Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service provider. This could save you time and effort but if the symptoms persist, then consult your service provider. Problems with the WAN Interface Problem Corrective Action Initialization of the PVC connection failed. Ensure that the cable is connected properly from the ADSL port to the wall jack.
VoIP ROUTER ADSL APPENDIX A Technical Features IP, NAT, ARP, ICMP, DHCP(server, relay and client), RIP1/2 , SNMP, SNTP client, UPnP, Telnet server RJ-45, 110/100Base-T port1 LAN port RJ-11 (1 port ADSL) WAN port Reset, Power On/Off External buttons Power, System, Lan (4), WLAN and ADSL LED Indicators Standard ADSL Compliance ANSI T1.413 Issue 2, ITU-T G.992.1(Full Rate DMT), ITU-T G.992.2 (Lite DMT), ITU-T G.994.
VoIP ROUTER ADSL APPENDIX B Support If you have any problems with the VoIP Router ADSL, please consult this manual. If you continue to have problems you should contact the dealer where you bought this ADSL Router. If you have any other questions you can contact the Atlantis Land company directly at the following address: Atlantis Land SpA Viale De Gasperi, 122 20017 Mazzo di Rho(MI) Tel: +39. 02.93906085, +39. 02.93907634(help desk) Fax: +39. 02.93906161 Email: info@atlantis-land.
