User's Manual

VoIP ROUTER ADSL
6
PORT Meaning
Power Switch
A Power ON/OFF switch
Power Jack
Connect the supplied power adapter to this
jack.
Reset
Press it to restore the factory default setting
back.
VoIP
Connect the RJ-11 cable to this port when
connecting to the phone set.
LAN
(RJ-45 connector)
Connect the supplied Ethernet cable to this port
when connecting to a NIC (Network Interface
card) in PC.
Connect an UTP Ethernet cable to this port
when connecting to a LAN such as an office or
home network.
2.4 Cabling
The most common problem is bad cabling or ADSL line. Make sure that all connected devices are
turned on. On the front of the product is a bank of LEDs. As a first check, verify that the LAN Link
and ADSL line LEDs are lit and SYS is blanking. If they are not, verify that you are using the proper
cables.