User's Manual

VoIP ROUTER ADSL

If this test returns FAIL, please try the test again a few minutes after this test is completed. Since

your DSL modem need a couple of seconds to a few minutes to establish the DSL connection

depending on your phone line quality. If this test returns FAIL, make sure your phone line is

connected to your DSL modem securely, and also check with your service provider to see if your

service is activated.

If this test returns FAIL, all other tests will be skipped.

Checking Circuit 0 for Network Connection

Test ATM OAM Segment Loop Back

This test sends ATM OAM F5 Segment loop back request cells to the central office equipments

through your DSL connection. This test will pass if response cell is received. Since your service

provider might not support this test, your DSL modem could still work even if this test fails.

If this test fails consistently and your DSL modem seems not working, check to make sure the VPI

and VCI are configured correctly.

This test returns FAIL if the DSL synchronization test failed.

Test ATM OAM End-to-End Loop Back

This test sends ATM OAM F5 End-to-End loop back request cells to the central office equipments

through your DSL connection. This test returns PASS if response cell is received. Since your

service provider might not support this test, your DSL modem could still work even if this test fails.

If this test return FAIL consistently and your DSL modem seems not working, check to make sure

the VPI and VCI are configured correctly.

This test returns SKIPPED if the DSL synchronization test failed.

Test Ethernet connect to ATM

This test returns PASS if the ATM AAL5 module is loaded correctly in your DSL modem. If this

test returns FAIL, an internal error has occurred.

This test returns SKIPPED if the DSL synchronization does not return PASS.

Test IP connect to PPP

This test returns PASS if your DSL modem has been assigned a valid IP address by your service

provider through DHCP or your DSL modem is assigned a valid IP address statically.

If this test returns FAIL, run this test again a few minutes after this test is completed. If this test

returns FAIL consistently and DHCP client is turned on in your DSL modem, check with your