User Manual

VoIPMaster 260W

You can setup member ports for each VLAN group under Bridge Interface section. From the

example, two VLAN groups need to be created.

Ethernet: P1 (Port 1)

Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN port

first.

You should setup each VLAN group with caution. Each Bridge Interface is

arranged in this order.

Bridge Interface VLAN Port (Always starts with)

Ethernet P1 / P2 / P3 / P4

Ethernet1 P2 / P3 / P4

Ethernet2 P3 / P4

Ethernet3 P4

Management Interface: To specify which VLAN group has possibility to do

device management, like doing web management.

NAT/NAPT can be applied to management interface only.