- Atlantis Wireless Router Quick Start Guide

ENGLISH
WebShare System 34
WebShare Wireless Router ADSL2+ is 192.168.1.254 and subnet mask is
255.255.255.0. The best and easy way is to configure the PC (client
DHCP) to get an IP address from the WebShare Wireless Router ADSL2+.
Please follow the steps below for PC’s network environment installation.
First of all, please check your PC’s network components. The TCP/IP
protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows relative manuals.
Before you configure this WebShare Wireless Router ADSL2+, you need to
know the following default settings:
• Username: admin
• Password: atlantis
• IP address (192.168.1.254), Subnet Mask (255.255.255.0)
• DHCP Server: enable (from 192.168.1.100 to 192.168.1.199)
• WAN=PPPoA Routing, VPI=8, VCI=35, VC-Mux
• SSSID= WebShare, Channel=6, WEP/WPA=disable
1.6 IE Configuration
Now open IE, go to Instruments menu, select the Connections tab and
select one of the following options:
• Never use remote connection
• Use remote connection if another network connection isn’t
available
1.7 TCP/IP Configuration
Configuring PC (Windows 95/98/ME)
1. Go to Start / Settings / Control Panel. In the Control Panel,
double-click on Network and choose the Configuration tab.
2. Select TCP / IP -> NIC Compatible, or the name of any Network
Interface Card (NIC) in your PC.
3. Click Properties.