DiskMaster NASG302D/F301D Dual Bay Gigabit/Fast Network Storage MULTILANGUAGE Quick Start Guide A06-NASG(F)302(1)D_GX01 Where solutions begin ISO 9001:2000 Certified Company
ITALIANO Questo prodotto è coperto da garanzia Atlantis Land On-Center della durata di 2 anni. Per maggiori dettagli in merito o per accedere alla documentazione completa in Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 2 years On-Center warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using the Switch, please refer to the online manual.
Copyright The Atlantis Land logo is a registered trademark of Atlantis Land. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions.
MULTILANGUAGE QUICK START GUIDE ITALIANO 1.1 Caratteristiche Principali .............................................................9 1.2 Contenuto della confezione ..................................................... 10 1.3 Dove posizionare il DiskMaster ............................................... 10 1.4 DiskMaster Application ............................................................ 11 1.5 I LED frontali ............................................................................ 11 1.
MULTILANGUAGE QUICK START GUIDE 1.9 Hard Disk setup ....................................................................... 46 Single Hard Drive installation ......................................... 47 Dual Hard Drive installation ............................................ 48 1.10 How to login ........................................................................... 50 1.11 Mapping a Network Drive ...................................................... 53 Mapping a Network Drive in Windows XP ..........
ITALIANO AVVERTENZE Abbiamo fatto di tutto al fine di evitare che nel testo, nelle immagini e nelle tabelle presenti in questo manuale, nel software e nell'hardware fossero presenti degli errori. Tuttavia, non possiamo garantire che non siano presenti errori e/o omissioni. Infine, non possiamo essere ritenuti responsabili per qualsiasi perdita, danno o incomprensione compiuti direttamente o indirettamente, come risulta dall'utilizzo del manuale, software e/o hardware.
ITALIANO CE Mark Warning Questo dispositivo appartiene alla classe B. In un ambiente domestico il dispositivo può causare interferenze radio, in questo caso è opportuno prendere le adeguate contromisure. Dichiarazione di Conformità (Contrassegno ) Con la presente Sidin SpA dichiara che questo Dual Bay NAS è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttive CE 2004/108/EC sulla “compatibilità elettromagnetica” e successive 92/31/ECC e 93/68/EEC.
ITALIANO Utilizzare i gommini per evitare che l’apparecchio possa scivolare facilmente sul piano di utilizzo. Posizionare il dispositivo su una superficie antisdrucciolo. I gommini in gomma/plastica possono danneggiare la superficie. Utilizzare solo i cavi specifici per le applicazioni. Utilizzare le porte indicate senza forzare. Verificare regolarmente che tutti i cavi di connessione non siano danneggiati. In caso lo fossero sostituirli immediatamente.
ITALIANO Grazie per aver acquistato il DiskMaster. La velocità offerta, l’ampia capacità di stoccaggio, la facilità d’uso ed il supporto di numerose applicazioni, rendono il DiskMaster la soluzione ideale per ogni necessità di immagazzinamento dati. 1.
ITALIANO DiskMaster, adatto ad un utilizzo sia in casa che in ufficio, rappresenta la soluzione ideale per la sicurezza dei dati a costo contenuto. 1.
ITALIANO 1.4 DiskMaster Applicazione In figura un esempio tipico di applicazione. 1.5 I LED frontali LED INFORMAZIONE PWR(Blu) Acceso quando connesso alla rete elettrica. LINK(Verde) Acceso quando connesso ad un dispositivo Ethernet. ACT(Rosso) Lampeggiante quando vi è trasmissione/ricezione.
ITALIANO 1.6 Le porte posteriori PORTE 1 Ventola 2 RESET UTILIZZO Non ostruire mai la ventola di raffreddamento dell’apparato. Lasciare uno spazio di almeno 10 cm. Dopo che il dispositivo è acceso, premere (per 5 secondi) per effettuare il reset dell’apparato (utilizzare, per esempio, in caso si perdesse la password di accesso).
ITALIANO 3 LAN(RJ45) Connettere con un cavo UTP. 4 USB(V1.1) Connettere la stampante USB per farla diventare una stampante di rete. 5 POWER (jack) Connettere l’alimentatore a questo jack. 6 POWER(ON/OFF) Bottone di accensione/spegnimento. La fase di accensione/spegnimento necessita di circa 3 minuti. 1.7 Settaggi di Default Prima di iniziare la configurazione del DiskMaster è necessario conoscere i settaggi di default.
ITALIANO 1.8 Inserimento dei dischi Seguire le istruzioni seguenti per l’inserimento degli Hard Disk nel DiskMaster. Svitare le viti poste nel pannello posteriore. Rimuovere il pannello in alluminio. Svitare le 4 viti che bloccano il cassetto porta Hard Disk. Inserire delicatamente nella parte bassa del cassetto il primo Hard Disk. Inserire delicatamente nella parte alta del cassetto il secondo Hard Disk. Serrare gli Hard Disk al cassetto usando le viti.
ITALIANO DiskMaster 15
ITALIANO Il modello A06-NASF301D dispone della sola interfaccia SATA I/II.
ITALIANO DiskMaster 17
ITALIANO 1.9 Formattazione degli Hard Disk A questo punto è necessario formattare il disco rigido (o i dischi rigidi) inserito nel DiskMaster. Per accedere alla configurazione del DiskMaster è possibile utilizzare l’utility fornita a corredo (cliccare 2 volte sul campo Selection sul nome del prodotto) oppure usare il browser WEB digitando l’indirizzo IP dell’apparato (nell’esempio l’IP di default 192.168.1.1). Premere il tasto invio. Utilizzare admin (come nome utente) e atlantis (come password).
ITALIANO Formattazione di un Hard Disk Una volta effettuato l’accesso nella sezione WEB del DiskMaster, cliccare sull’icona DiskTools ( seguente schermata: )e poi su Basic Mode. Verrà mostrata la Cliccare, una volta scelta la tipologia di formattazione e la cifratura (se attivata), su Format per iniziare. Una volta terminata la formattazione il sistema effettuerà un riavvio.
ITALIANO Il Diskmaster supporta, per i drive non in modalità array, 3 differenti file system: EXT2, EXT3 e FAT32. Il file system EXT3 garantisce le migliori performance e caratteristiche. Il processo di formattazione può durare anche sino 30 minuti, durante tale lasso di tempo non fare nulla. Questo processo di formattazione va fatto solo nel caso in cui sia presente un solo HDD nel DiskMaster. Non formattare 2 HDD singolarmente (questo impedirà la creazione del RAID).
ITALIANO Questa sezione è disponibile solo nel caso in cui 2 Hard Disk vengano installati nell’apparato. La formattazione e/o il cambiamento da una modalità RAID ad un’altra distruggerà, in maniera irreparabile, tutti i dati presenti sull’Hard Disk. Accertarsi di aver effettuato il backup dei dati importanti prima di procedere. La creazione del RAID è un processo che potrebbe richiedere diverso tempo (anche alcune ore).
ITALIANO Laddove Create Raid System non fosse visualizzato verificare i seguenti punti: Verificare che entrambi i dischi siano correttamente connessi. La formattazione del disco deve essere fatta dal sistema una volta scelta la modalità di array (sia essa RAID0/1 o JBOD) e non precedentemente. Accedere alla configurazione WEB del DiskMaster, cliccare su Disk Tools->Raid Setting e cliccare su Remove System Data.
ITALIANO Se il DiskMaster non venisse trovato, cliccare nuovamente su Search Again (accertarsi che ogni Firewall sia disabilitato). Selezionare il dispositivo (l’indirizzo IP verrà assegnato da un server DHCP o sarà 192.168.1.1 se questo non è presente in rete) e cliccare poi su OK per far partire il Wizard. Introdurre ora la password di accesso (admin/atlantis) e cliccare su OK.
ITALIANO Selezionare il fuso orario, data ed ora e cliccare su Next. A questo punto verrà mostata una schermata riassuntiva delle caratteristiche appena impostate.
ITALIANO nuovamente i settaggi impostati, cliccare invece su Save per confermare (e poi su OK). Alternativamente è possibile effettuare la configurazione guidata attraverso l’interfaccia WEB. Lanciare Internet Explorer (o un browser equivalente), digitare l’indirizzo IP del DiskMaster (l’utility può aiutare a trovare l’indirizzo IP dell’apparato), introdurre la username e password (admin/atlantis) per il Login.
ITALIANO 1.11 Connessione di rete Creazione della Connessione Remota in Windows XP In Windows XP è possibile creare la connessione di Rete operando come segue: Start->Pannello di Controllo Cliccare sul menu Strumenti e poi Connetti unità di Rete Cliccare su Sfoglia, poi selezionare sotto WorkGroup il nome precedentemente attribuito all’apparato (DiskMaster nel caso di default) e poi la cartella Public e cliccare su OK. Spuntare la voce Riconnetti all’avvio, come in Figura.
ITALIANO Cliccare su nome utente diverso ed immettere username e password (admin, atlantis). Cliccare su OK. Cliccare poi su Fine. A questo punto è possibile accedere al disco inserito nel DiskMaster (utilizzando la cartella Public) come fosse un disco del proprio PC. Per ulteriori dettagli su una configurazione avanzata fare riferimento al manuale completo presente su CD.
ITALIANO Creazione della Connessione Remota in Windows Vista In Windows Vista è possibile creare la connessione di Rete operando come segue: Start->Computer Cliccare su Connetti unità di Rete Cliccare su Sfoglia, poi selezionare il nome precedentemente attribuito all’apparato (DiskMaster nel caso di default) e poi la cartella Public e cliccare su OK. Cliccare su nome utente diverso ed immettere username e password (admin, atlantis). Cliccare su OK.
ITALIANO In caso di problemi è possibile forzare direttamente l’indirizzo IP dell’apparato per la mappatura di un’unità di rete usando la sintassi: \\Indirizzo IP\Public nel campo cartella. Cliccare su nome utente diverso ed immettere username e password (admin, atlantis). Cliccare su OK. Cliccare poi su Fine. 1.12 Risoluzione dei problemi Questo capitolo illustra come identificare e risolvere eventuali problemi sul DiskMaster. A.
ITALIANO 3 4 Verificare che la scheda di rete del PC funzioni correttamente. Se il problema dovesse persistere contattare l’assistenza tecnica Atlantis Land. A.2 Login con Username e Password E’ stata dimenticata la password di accesso. Steps Azione correttiva Se è stata cambiata la password di accesso ed è stata 1 dimenticata, è necessario caricare la configurazione di default. Ciò cancellerà tutte le configurazioni eseguite dall’utente e ripristinerà la password di default.
ITALIANO 3 4 alla stessa rete del DiskMaster. Se è stato modificato l’indirizzo IP del DiskMaster è necessario modificare l’URL di accesso al prodotto. Lanciare l’utility a corredo per cercare il nuovo indirizzo IP. Se i problemi persistono effettuare un reset dell’apparato. A.
ITALIANO cambio di formattazione. Perché alcuni menu riportati nel manuale non sono disponibili a video? Steps Azione correttiva Molte funzionalità richiedono che sia installato un Hard Disk. 1 Per talune funzionalità (RAID) è necessario installare 2 Hard Disk.
ITALIANO 1 L’apparato integra un server SAMBA (basato su SMB, Server Message Block) per il file sharing. In altre parole se il PC utilizza il protocollo IP può accedere ai file condivisi. Alternativamente il server FTP integrato permette di ottenere le stesse funzionalità (sul PC deve però essere presente un FTP client). Perché il DiskMaster non rileva la stampante USB correttamente collegata? Steps Azione correttiva Le stampanti basate su GDI/Host-based non sono supportate.
ITALIANO DiskMaster 34
ENGLISH Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP/VIsta are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land.
ENGLISH to data recovery, removal and installation are not recoverable under our warranties. Safety Information Only qualified personnel should carry out technical work on the device. When cleaning, avoid using cleaning sprays and any kinf of solution containing alcohol or other flammable liquids. Avoid overheating. This may reduce the life of the device. Protect your device from humidity, direct sunlight as well as high and extremely low temperatures.
ENGLISH Thank you for purchasing the DiskMaster storage solution. With speed, ease of use, high capacity, and support for numerous applications, DiskMaster is the ideal solution for all of your data storage needs. 1.1 An Overview of the DiskMaster Securely access all of your multimedia, music and data files on your local LAN or through Internet.
ENGLISH away with the need to have a computer connected to it, and allowing you to share it with the rest of the users in the office or at home. 1.2 Package contents Unpack the package and check all the items carefully. Also, keep the box and packing materials in case you need to ship the unit in the future.
ENGLISH 1.4 DiskMaster Application When you have completed the steps in this Quick installation Guide, your connected network should look similar to this: 1.5 The Front LEDs The following figures illustrate the connector locations for the DiskMaster. LED MEANING PWR(Blue) Lit when power ON. LINK(Green) Lit when connected to Ethernet device.
ENGLISH ACT(Red) Flashes when sending/receiving data. 1.6 The Rear Ports PORT 1 MEANING FAN Leave at least 10cm of space at the rear of the device for ventilation.
ENGLISH 2 RESET 3 LAN(RJ45) 4 USB(V1.1) 5 POWER (jack) 6 POWER(ON/OFF) After the device has turned on (turn on the power and wait 3 minutes), press and hold reset button for 5 seconds, then release it to reset it (this is used when you can not login to the DiskMaster, e.g. forgot the password. Please use the Ethernet cable to connect the DiskMaster to network. Please use the USB printer cable to connect the device’s USB port (fro printe server). Connect the supplied power adapter to this jack.
ENGLISH 1.8 Hardware Installation Following is a quick installation guide to get you up and running. For further details on each of the settings, please refer to manual on CD. Release two screws from the back side. Remove the aluminium plate. Release the 4 screws in the Hard Disk Mount. Place the first Hard Disk in to lower mont. Place the second Hard Disk in the upper area. Fasten all Hard Disk screws. For SATA Hard Disk: connect both power cable and data cable in to Hard Disk.
ENGLISH DiskMaster 43
ENGLISH DiskMaster 44
ENGLISH Dual Interface (SATA I/Il and EIDE) is available only on A06-NASG302D.
ENGLISH 1.9 Hard Disk setup If the hard disks are being installed for the first time, you need to initialize the disks before you can use them. Follow the steps described below. Open the web browser, enter the local port IP address of this DiskMaster, which default at 192.168.1.1, and click Go to get the login page. The default username is admin, password atlantis and click “OK” to continue.
ENGLISH Single Hard Drive installation The following illustrates the layout of the Web-based Configuration Tool main screen. This page allows you to format the physical hard disks into DiskMaster. Click on DiskTools ( ) then Basic Mode. Select the mode for the NAS system to partition and format disks. Select, in the combo box, the system file (EXT2 / EXT3 / FAT32), EXT 3 is recommend. Press Format to start formatting (it may require some times; do not perform other jobs during hard drive formatting).
ENGLISH Allow system file EXT2 / EXT3 or FAT32. Dual Hard Drive installation The following illustrates the layout of the Web-based Configuration Tool main screen. This page allows you to format the physical hard disks into DiskMaster. Click on DiskTools ( ) then Raid Settings. In this section you can manage the RAID array and set up your drives. The DiskMaster supports RAID 0 and RAID 1. Two hard drives of identical capacity and make are required.
ENGLISH Creating the RAID system will take several hours, depending on HDD capacity. Do not turn off the power or interrupt the system in any other way during this process! We recommend using the EXT2 file system for optimum performance and functionality. Changing the RAID setup will require you to re-format the drives.
ENGLISH 1.10 How to login To configure your DiskMaster , you will need to use the web browser, enter the IP address and then use the web configuration for further setup. To find out the IP address of your device once it is connected to the network, there are several different ways as described on the following pages. Use the Setup utility included on the CD. This will list the device automatically and allow you to access the web configuration interface with a simple click of your mouse.
ENGLISH password and press OK to login. You can define the name (Server Name) for your device and set up the IP configuration. When set, press Next to continue. Set time zone, current Date and Time. Click Next.
ENGLISH you can compare your new settings with the previous configuration. If you find a mistake, go back to make changes but if everything is OK, press Save, then OK. Alternatively, you could also simply write down the IP address in the first step of the setup wizard and then access the web configuration interface via your web browser. Input the IP address in the URL field of your web browser, hit the Enter key, enter admin for the username, once more atlantis for the password and then login.
ENGLISH 1.11 Mapping a Network Drive Mapping a Network Drive in Windows XP Start->Control Panel. Go to the Tools menu and select Map Network Drive. Follow the setup wizard and fill in the path to your DiskMaster. Alternatively, you can also browse for the shares by clicking on the Browse button and locating the folder that way (choose Public folders). Select Reconnect at Logon. Click on different user name and digit username and password (admin, atlantis). Then click OK. Then click Finish.
ENGLISH In event of problem, please write directly the IP (instead of name) in the folder name. Please write: \\IP address\Public. Click on different user name and digit username and password (admin, atlantis). Then click OK, then Finish. Mapping a Network Drive in Windows Vista Start->Computer Click on Map Network Drive. Follow the setup wizard and fill in the path to your DiskMaster.
ENGLISH Operating System. If event of problem , please write directly the IP (instead of name) in the folder name. Please write:\\IP Address\Public. Click on different user name and digit username and password (admin, atlantis). Then click OK, then Finish. 1.12 Troubleshooting This chapter covers potential problems and the corresponding remedies. A.1 Using LEDs to Diagnose Problems The LEDs are useful aides for finding possible problem causes. A.1.
ENGLISH A.2 Login: Username and Password I forgot my login username and/or password. Steps 1 2 3 Corrective Action If you have changed the password and have now forgotten it, you will need to upload the default configuration file. This will erase all custom configurations and restore all of the factory defaults including the password.
ENGLISH 4 Reset the device. A.4 General Why Can’t I perform RAID function under FAT32 format? Steps Corrective Action FAT32 format doesn’t support RAID functions. 1 To perform RAID functions please use EXT2 or EXT3 format. 2 Some of the functions and menus are not available! Steps Corrective Action Many of the functions require a hard drive to be installed. 1 Make sure you have at least one HDD installed and formatted in EXT2 or EXT3.
ENGLISH 1 The NAS uses standby mode for power management (Sleep time), if there is no any activity ranging 5-60 min. You can go to web base > Disk Utility > Set Sleep Time function (0 to disable function, range 5-60 to enable function. What is the protocol of network file sharing system using by DiskMaster? Steps Corrective Action DiskMaster has the built-in Samba Server for file sharing, it is 1 using SMB (Server Message Block) protocol to integrate TCP/IP, NETBUEI and IPX/SPX protocol.
APPENDIX A APPENDIX A: Technical Features (A06-NASG302D) Protocols LAN port USB A Port LED Indicators Hard Disk Supported System Format: CPU Sharing Protocol Advanced Features External buttons Input Power Power Consumption Agency and Regulatory Dimensions Weight Operating Temperature Storage Temperature Operating Humidity IP, NBNS(“NetBios” Name Server), Microsoft Networks (CIFS/SMB), DHCP Server/Client, SNTP Client, NTP 1 x RJ45 10/100/1000 Base-T port USB V1.
APPENDIX B APPENDIX B: Technical Features (A06-NASF301D) Protocols LAN port USB A Port LED Indicators Hard Disk Supported System Format: CPU Sharing Protocol Advanced Features External buttons Input Power Power Consumption Agency and Regulatory Dimensions Weight Operating Temperature Storage Temperature Operating Humidity IP, NBNS(“NetBios” Name Server), Microsoft Networks (CIFS/SMB), DHCP Server/Client, SNTP Client, NTP 1 x RJ45 10/100/ Base-T port USB V1.
Atlantis Land Via Pelizza da Volpedo, 59 20092 Cinisello Balsamo – MI – Italy info@atlantis-land.