Wireless 108Mbps Multi-Function Access Point MANUAL

Wireless 108Mbps Multi-Function Access Point
A02-WAP-54G Pag. 40
seconds, the LED of the WLAN will turn off. And when the
Access Point is ready, the WLAN LED will start blinking.
And the other function is when the AP is locked, press the
reset button to unlock it.
2
Before configurating thisWireless Multi-Function Access Point,
you need to know the following default settings.
Username: admin
Password : admin
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Wireless: SSSID= default, Channel=6, WEP=disable