I-Storm USB ADSL modem A01-AU1 MULTILANGUAGE MANUAL A01-AU1_MX01
MULTILANGUAGE MANUALS ITALIANO 1.1 Caratteristiche tecniche dell’I-Storm USB ADSL Modem .......................................................................... 6 1.2 Contenuto della confezione..................................... 6 1.3 LED frontali ............................................................ 7 1.4 Informazioni da chiedere all’ISP ............................ 7 1.5 Installazione dell’I-Storm USB ADSL Modem...... 8 1.6 Installazione Drivers ...............................................
MULTILANGUAGE MANUALS 1.6.4 For Windows XP........................................ 43 1.6.5 Mac OS 9, Mac OSX e Linux .................... 49 1.7 Configuration ........................................................ 50 1.8 LAN DRIVER (RFC1483, RFC1577)................. 52 1.8.1 For Windows 98/Me .................................. 52 1.8.2 For Windows 2000 / XP............................. 55 1.9 WAN DRIVER(PPPoA, PPPoE).......................... 58 1.10 Product Support......................................
ITALIANO Copyright Copyright . 2002 è di proprietà di questa società. Tutti i diritti riservati. È vietata la riproduzione, la trasmissione, la trascrizione, la memorizzazione in un sistema di recupero o la traduzione in una qualsivoglia lingua o linguaggio informatico della presente pubblicazione, in qualsiasi forma o con qualsiasi mezzo, elettronico, meccanico, magnetico, ottico, chimico, manuale o di altro genere, senza previo consenso da parte della nostra azienda.
ITALIANO 1.1 Caratteristiche tecniche dell’I-Storm USB ADSL Modem L’I-Storm USB ADSL Modem offre le seguenti caratteristiche: ♦ Modem per connessione ADSL. ♦ Downstream data rate sino a 8 Mbps e upstream sino ad 1 Mbps. ♦ Alimentato dal bus USB, non richiede alimentatore esterno. ♦ Hot Plug and Play per Microsoft Windows 98 (SE), 2000, Me ed XP. ♦ Supporta interfaccia Networking.
ITALIANO 1.3 LED frontali LED Significato USB Quando questo Led è acceso indica che la porta USB è connessa al PC e che il dispositivo funziona propriamente. DATA Lampeggia durante il trasferimento di dati. ADSL Quando questo Led è acceso indica l’avvenuto allineamento con il DSLAM del fornitore di servizio, se lampeggia sta allineandosi col DSLAM. 1.
ITALIANO PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, Service Name e indirizzi IP del Domain Name System (DNS) (possono essere assegnati automaticamente oppure settati come fissi). PPPoA VPI/VCI, VC-based/LLC-based multiplexing, Username, Password e indirizzi IP del Domain Name System (DNS) (possono essere assegnati automaticamente oppure settati come fissi).
ITALIANO Poiché l’ADSL ed il normale servizio telefonico si dividono (spesso) lo stesso filo per trasportare i rispettivi segnali è necessario, al fine di evitare interferenze dannose, dividere tramite un apposito filtro i 2 segnali. Tale filtro passa basso permetterà di estrarre la porzione di spettro utilizzata dal servizio telefonico impedendo così che la qualità di questo sia compromessa dalle alte frequenze introdotte dal segnale dell’ADSL.
ITALIANO 2. Nelle finestre successive selezionare Cerca il miglior driver per la periferica (scegliere Specificare il percorso dei driver per ME) e premere poi sul bottone Avanti. 3. Inserire a questo punto nel lettore CDRom il CD contenuto nella confezione.
ITALIANO Specificare un percorso e premere poi su Sfoglia ed indicare il percorso in cui sono contenuti i driver (CDRom:\Driver\WAN o LAN) e premere poi su OK. Cliccare poi su Avanti per proseguire. 4. 5. 6. Continuare premendo Avanti nelle successive richieste sino a che non termina l’installazione dei driver. Nella schermata conclusiva premere su Fine.
ITALIANO 7. Una nuova icona sarà anche presente nel Pannello di controllo e sul Desktop (oltre all’icona per il Dial Up in caso di driver WAN). 8. Andando in Pannello di controllo, poi in Sistema, Gestione periferiche è possibile vedere sotto Schede di rete e Controller USB due nuove istanze relative all’I-Storm USB. 1.6.2 Windows 2000 1. Avviare Windows 2000. Il Sistema Operativo, una volta collegato l’I-Storm al PC tramite il cavo USB, rileverà una nuova periferica.
ITALIANO 2. Inserire a questo punto nel lettore CDRom il CD contenuto nella confezione. Nella finestra scegliere Specificare un percorso e premere su Avanti e poi tramite il tasto Sfoglia indicare il percorso in cui sono contenuti i driver (CDRom:\Driver\WAN o LAN) e premere poi su OK. Cliccare poi su Avanti per proseguire. 3. Durante l’installazione saranno mostrate in successione le finestre (la seconda richiesta potrebbe avvenire dopo il riavvio del Sistema Operativo), premere sul pulsante Si.
ITALIANO 4. Per finire, cliccare su Fine. Potrebbe essere necessario riavviare il PC. 5. A questo punto i driver dell’I-Storm USB ADSL Modem sono stati installati con successo, nella barra di stato dovrebbe apparire una nuova icona. Potrebbe apparire anche un’icona di Rimozione sicura che va utilizzata (per scegliere) prima di staccare la periferica USB 6. Una nuova icona sarà anche presente nel Pannello di controllo e sul Desktop (oltre all’icona per il Dial Up in caso di driver WAN). 7.
ITALIANO 1.6.3 Windows XP 1. Avviare WindowsXP. Il Sistema Operativo, una volta collegato l’I-Storm al PC tramite il cavo USB, rileverà una nuova periferica. Nella finestra di Installazione guidata del nuovo hardware spuntare Installa da un elenco o percorso specifico e premere poi su Avanti. 2. Inserire a questo punto nel lettore CDRom il CD contenuto nella confezione.
ITALIANO 3. Durante l’installazione verranno mostrate in successione le finestre (sotto riportate), premere su Continua (entrambe le volte).
ITALIANO 4. Per finire, cliccare su Fine. 5. Dopo qualche istante, il Sistema Operativo mostrerà una nuova finestra. Premere semplicemente su Avanti.
ITALIANO 6. All’apparire della finestra (sotto riportata) premere su Continua. 7. Premere poi su Fine per terminare l’installazione. 8. A questo punto i driver dell’I-Storm USB ADSL Modem sono stati installati con successo, è possibile adesso poter vedere nella barra di stato di XP una nuova icona. Potrebbe apparire anche un’icona di Rimozione sicura che va utilizzata (per scegliere) prima di staccare la periferica USB. 9.
ITALIANO 10. Andando in pannello di controllo (passa alla visualizzazione classica), poi in sistema, hardware ed infine gestione periferiche, è possibile trovare sia sotto schede di rete che controller USB due nuove istanze relative all’I-Storm USB. 1.6.4 Mac OS 9, Mac OSX e Linux Fare riferimento alle istruzioni in Inglese presenti sul CDRom di installazione.
ITALIANO 1.7 Configurazione Generale Seguire le seguenti istruzioni per configurare l’I-Storm USB ADSL modem. 1. Cliccare sull’icona I-Storm USB ADSL Modem presente nel pannello di controllo o sul desktop. Apparirà la finestra sotto riportata.
ITALIANO 2. Premendo [Alt]+[P] sulla tastiera è possibile accedere alla configurazione avanzata. 3. Selezionare il tag Protocol Setup, inserire i valori di VPI=8 e VCI=35 e scegliere nel campo Encapsulation Mode il tipo di incapsulamento ed il relativo framing. Solitamente per il PPPoA scegliere PPP over ATM VCMUC (RFC 2364) mentre per il PPPoE scegliere PPP over Ethernet LLCSNAP (RFC 2516). Premere su Applica ed infine su OK.
ITALIANO 1.8 Configurazione Driver LAN(RFC1577, 1483) 1.8.1 Windows 98 / Me 1. Andare in Panello di controllo, cliccare sull’icona Rete e scegliere il tab Configurazione. 2. Selezionare TCP/IP → I-Storm USB-ADSL LAN Adapter. Cliccare poi su Proprietà..
ITALIANO 3. Selezionare il tab Indirizzo IP ed introdurre nel campo Indirizzo IP e Subnet Mask I valori forniti dall’ISP. 4. Selezionare il tab Gateway, introdure nel campo Nuovo gateway l’indirizzo IP del Gateway e cliccare su Aggiungi.
ITALIANO 5. Selezionare il tab Configurazione DNS, selezionare il bottone Attiva DNS ed introdurre nel campo Host un qualsiasi nome. Introdurre poi gli indirizzi IP dei DNS e premere su Aggiungi.
ITALIANO 1.8.2 Windows 2000 / XP 1. Andare nel Pannello di Controllo e qui cliccare due volte sull’icona Connessioni di rete. 2. Andare sull’icona relativa all’I-Storm USB, premere il tasto destro ed andare su Proprietà. 3. Selezionare (nel tab Generale) Protocollo Internet (TCP/IP). Cliccare poi su Proprietà.
ITALIANO 4. Selezionare Utilizza il seguente indirizzo IP ed introdurre l’IP assegnato dall’ISP, la subnet mask ed il Gateway predefinito. Selezionare poi Utilizza i seguenti indirizzi server DNS ed introducete poi gli indirizzi dei server DNS dati dall’ISP.
ITALIANO 27
ITALIANO 1.9 Configurazione Driver WAN(PPPoA, PPPoE) 1. Cliccare sull’icona di Dial-Up creata sul desktop o nel gruppo apposito. Inserire Nome utente e Password e cliccare su Componi per accedere ad Internet.
ITALIANO 1.10 Supporto Offerto Per qualunque altro problema o dubbio (chiamare preventivamente l’ISP per conoscere TUTTI i dettagli relativi a: Protocollo, Incapsulamento, VPI/VCI ed eventuali indirizzi IP) è possibile contattare l’help desk telefonico (02/93907634) gratuito di Atlantis Land che fornirà assistenza da lunedì al giovedì dalle 9:00 alle 13:00 e dalle 14:00 alle 18:00. Il venerdì dalle 9:00 alle 13:00.
ENGLISH 1.1 I-Storm USB ADSL Modem Features I-Storm USB ADSL Modem provides the following features: ♦ Bus-powered USB modem for broadband ADSL. ♦ Downstream data rate up to 8 Mbps and upstream up to 1 Mbps. ♦ No external power supply is required. ♦ Hot Plug and Play for Microsoft Windows 98 (SE), 2000, Me, and XP. ♦ Supports NDIS interface for RAS and Dial-Up Networking. ♦ Software upgradeable.
ENGLISH 1.3 The Front LEDs LED Meaning USB When this LED is lit, it indicates that the USB port is connected to the PC and working properly. DATA Flashes when transferring data. ADSL When lit, it indicates that the ADSL (Line) port is connected to the DSLAM and working properly. 1.4 Information from ISP Before you start installing this device, you have to check with your ISP what kind of service (connection method) is provided such as PPPoE, PPPoA, RFC1483 bridged or routed, IPoA.
ENGLISH PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, Service Name, and Domain Name System (DNS) IP address (it can be automatically assigned from ISP or be set fixed). PPPoA VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, and Domain Name System (DNS) IP address (it can be automatically assigned from ISP or be set fixed).
ENGLISH 1.6 Installing I-Storm USB ADSL Modem Drivers 1.6.1 For Windows 98 1. Start Windows. After the opening banner, Windows will tell you that the new device has been detected. You will then see the following screen. Click “Next >”. 2. In the next window, select “Search for the best driver for your device” and click “Next >”.
ENGLISH 3. Insert the installation CD into the CD-ROM drive and check “Specify a location”. Click “Browse…” to specify the driver directory such as CDRom:\DriverEng\LAN (or CDRom:\Driver\LAN) for installing I-Storm USB ADSL LAN Adapter or CDRom:\DriverEng\WAN (or CDRom:\Driver\WAN) for installing I-Storm USB ADSL WAN Adapter. (Please refer Information from ISP section for more details.) Click “OK” and then “Next>” to continue.
ENGLISH 35
ENGLISH 4. 5. Continuing through the Wizard, click the “Next >” button. Windows will start copying files to your system. Then, click “Finish”. You will see the following screen prompting for the path of the Windows source files. Please specify a location. Click “OK”. 6. I-Storm USB A DSL Modem driver is successfully installed and the Status Task Bar will appear in the System Tray. 7. I-Storm USB ADSL Modem icon is installed in the Control Panel. 8.
ENGLISH Go to the Device Manager, the “I-Storm USB ADSL WAN Adapter” is under the Network Adapters, and “I-Storm USB ADSL Modem” is under the Universal Serial Bus Controllers for IStorm USBADSL WAN driver installation. 1.6.2 For Windows Me 1. Start Windows. After the opening banner, Windows will tell you that the new device has been detected. Select “Specify the location of the driver” and click “Next >”. 2. Insert the installation CD into the CD-ROM drive and check “Specify a location”.
ENGLISH Information from ISP section for more details.) Click “OK” and then “Next>” to continue.
ENGLISH 3. Continuing through the Wizard, Windows will start copying files to your system. Then, click “Finish”. 4. I-Storm USB ADSL Modem driver is successfully installed and the Status Task Bar will appear in the System Tray. 5. I-Storm USB ADSL Modem icon is installed in the Control Panel.
ENGLISH 6. Go to the Device Manager, the “I-Storm USB ADSL LAN Adapter” is under the Network Adapters, and “I-Storm USB ADSL Modem” is under the Universal Serial Bus Controllers for IStorm USBADSL LAN driver installation. Go to the Device Manager, the “I-Storm USBADSL WAN Adapter” is under the Network Adapters, and “I-Storm USB ADSL Modem” is under the Universal Serial Bus Controllers for I-Storm USBADSL WAN driver installation. 1.6.3 For Windows 2000 1. Start Windows.
ENGLISH the CD-ROM drive. In next window, check “Specify a location” and click “Next>”. 3. Click “Browse…”. In the Locate File window, specify the driver directory such as CDRom:\DriverEng\LAN\ (or CDRom:\Driver\LAN) for installing I-Storm USBADSL LAN Adapter or CDRom:\DriverEng\WAN\ (or CDRom:\Driver\WAN) for installing I-Storm USB ADSL WAN Adapter. (Please refer Information from ISP section for more details.) Click “Open” and then “Next>“ to continue.
ENGLISH 4. When windows titled “Digital Signature Not Found” appear, press “Yes” to continue the installation. 5. Press “Finish”. 6. I-Storm USB ADSL Modem driver is successfully installed and the Status Task Bar will appear in the System Tray.
ENGLISH 7. I-Storm USB ADSL Modem icon is installed in the Control Panel. 8. Go to the Device Manager, the “I-Storm USB ADSL LAN Adapter” is under the Network Adapters, and “I-Storm USB ADSL Modem” is under the Universal Serial Bus Controllers for IStorm USBADSL LAN driver installation. Go to the Device Manager, the “I-Storm USB ADSL WAN Adapter” is under the Network Adapters, and “I-Storm USB ADSL Modem” is under the Universal Serial Bus Controllers for IStorm USBADSL WAN driver installation. 1.6.
ENGLISH 2. Insert the installation CD into the CD-ROM drive and select “Include this location in the search”. Click “Browse” to specify the driver directory such as CDRom:\DriverEng\LAN (or CDRom:\Driver\LAN) for installing I-Storm USB ADSL LAN Adapter or CDRom:\DriverEng\WAN (or CDRom:\Driver\WAN) for installing I-Storm USB ADSL WAN Adapter. (Please refer Information from ISP section for more details.) Click “OK” and then “Next>” to continue.
ENGLISH 45
ENGLISH 3. When windows titled “Hardware Installation” or “Software Installation” appear, press “Continue Anyway” to go on.
ENGLISH 4. Then, click “Finish”. 5. Wait a few moments. Windows will show that the new device, I-Storm USBADSL LAN (or WAN) Adapter, has been detected. Select “Install from a list or specific location”. Click “Next >” 6. Click “Next >” when the following figure appears. 7. When windows titled “Hardware appears, press “Continue Anyway”.
ENGLISH 8. Then, click “Finish” to end the installation. 9. I-Storm USBADSL Modem driver is successfully installed and the Status Task Bar will appear in the System Tray. 10. I-Storm USB ADSL Modem icon is installed in the Control Panel. 11. Go to the Device Manager, the “I-Storm USB ADSL LAN Adapter” is under the Network Adapters, and “I-Storm USB ADSL Modem” is under the Universal Serial Bus Controllers for I-Storm USB ADSL LAN driver installation.
ENGLISH Go to the Device Manager, the “I-Storm USB ADSL WAN Adapter” is under the Network Adapters, and “I-Storm USB ADSL Modem” is under the Universal Serial Bus Controllers for IStorm USB ADSL WAN driver installation. 1.6.5 Mac OS 9, Mac OSX e Linux Please refer to the English instructions (on CD Rom) for this installation.
ENGLISH 1.7 Configuration Follow the instructions below to configure your I-Storm USB ADSL Modem. 1. Click I-Storm USB ADSL Modem icon in the Control Panel or ADSL Configuration icon on the desktop. The status of ADSL connection will be displayed.
ENGLISH 2. Press [Alt]+[P] on keyboard, the following figure appears. 3. Select the Protocol Setup tag, please set the value of “VPI”, “VCI” and “Encapsulation Mode”. Then, click “OK”. For BT (VPI=0, VCI=50).
ENGLISH 1.8 LAN DRIVER (RFC1483, RFC1577) 1.8.1 For Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP → I-Storm USB ADSL LAN Adapter. Then, click Properties. 3. Select the IP Address tab. In this page, click the Specify an IP address radio button and enter the “IP address” and “Subnet Mask” provided by your ISP.
ENGLISH 4. Select the Gateway tab. Enter the “gateway” provided by your ISP and click Add.
ENGLISH 5. In the DNS Configuration page. Click the Enable DNS radio button. Enter the “Host” name and “DNS Server IP address” provided by your ISP. Then, press the Add button.
ENGLISH 1.8.2 For Windows 2000 / XP 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dialup Connections. 2. Right–click on Local Area Connection that is using the I-Storm USB ADSL LAN Adapter and then click “Properties”.
ENGLISH 3. Select Internet Protocol (TCP/IP). Then, click “Properties”.
ENGLISH 4. Select Use the following IP address, and then enter the “IP address”, “Subnet mask”, and “Default gateway” provided by your ISP. Select Use the following DNS server addresses and then enter the provided DNS server IP address.
ENGLISH 1.9 WAN DRIVER(PPPoA, PPPoE) 1. Click ADSL Easy Dialup icon on the desktop. Then, the following window appears. Enter the “Username” and “Password” provided by your ISP. Let the Phone number field be blank.
ENGLISH 2.
ENGLISH 1.10 Product Support If you have any problems with the I-Storm USB ADSL Modem, please contact the dealer where you bought this product. If you have any other questions you can contact the Atlantis Land company directly at the following address: Atlantis Land SpA Viale De Gasperi 122 20017 Mazzo di Rho (MI) ITALY Tel: +39.(0)2.93906085 Fax: +39.(0)2.93906161 Help Desk :+39.(0)2.93907634 Email: tecnici@atlantis-land.com WWW: www.atlantis-land.
FRANCAIS Copyright Copyright . 2002 est la propriété de cette société. Tous droits réservés.
FRANCAIS Toutes les marques ou noms de produits mentionnés dans le présent manuel sont des marques commerciales et/ou brevetées par leurs propriétaires respectifs.
FRANCAIS 1.1 Principales caractéristiques L’I-Storm USB ADSL offre les caractéristiques suivantes: ♦ Controllerless external USB ADSL Modem ♦ Chipset Conexant AccessRunner™ (Falcon 2P) ♦ Full-rate avec une vitesse descendante jusqu’à 8 Mbps et une vitesse montante jusqu’à 1,5Mbps ♦ G.
FRANCAIS 1.2 Dans la boîte Au moment d'ouvrir la boîte, vérifiez son contenu : ♦ Atlantis I-Storm USB ADSL Modem ♦ CD avec pilotes et manuels ♦ Câble téléphonique (RJ11) ♦ Câble USB ♦ Guide d'installation 1.3 Les voyants (Face avant) LED USB SIGNIFICATION Allumé pour indiquer que l’I-Storm est actif DATA Il clignote vert quand des données sont transférées ADSL Allumé fixe vert il indique l'alignement correct, (s'il clignote) il est en train de s'aligner avec le DSLAM 1.
FRANCAIS suivant récapitule les informations dont vous aurez besoin en fonction des pilotes à installer : PPPoE VPI/VCI, VC-based/LLC-based, Username, Password, Service Name PPPoA VPI/VCI, VC-based/LLC-based multiplexing, Username, Password RFC1483 Bridged VPI/VCI, VC-based/LLC-based multiplexing RFC1483 Routed VPI/VCI, VC-based/LLC-based multiplexing, Adresse IP, Masque de sousréseau, Adresse IP du Default Gateway et Adresses IP du serveur DNS IPoA VPI/VCI, VC-based/LLC-based multiplexing, Adresse
FRANCAIS Attention si ces valeurs sont erronées le modem ne fonctionnera pas correctement (de toute façon l'alignement correct peut se vérifier). En cas de doutes demandez confirmation à votre fournisseur d’accès. 1.5 Installation de l’I-Storm USB ADSL Modem Faire référence aux instructions suivantes: ♦ Raccordez le câble téléphonique fourni au filtre (non livré dans la boîte) ADSL qui doit être branché sur votre ligne téléphonique.
FRANCAIS Win98 choisir Spécifier un emplacement). Cliquez sur Parcourir pour atteindre l’emplacement des pilotes. CDRom:\DriverEng\Wan [ou CDRom:\Driver\Wan] (pour PPPoA or PPPoE) ou choisir CDRom:\DriverEng\Lan [ou CDRom:\Driver\Lan] (pour RFC1577 or RFC1483). Cliquez enfin sur Suivant. 4. 5. Cliquez sur Suivant dans les fenêtres suivantes jusqu’au dernier écran, cliquez sur Terminer. Il pourrait être nécessaire d'introduire le CDRom d’origine de Windows 98.
FRANCAIS 1.6.2 Windows 2000 1. Insérez le CD fourni et allumez l’ordinateur. Dès que vous connectez l’I-Storm ADSL modem au port USB de l’ordinateur, une nouvelle fenêtre apparaîtra. Cliquez sur Suivant . 2. Dans la fenêtre suivante sélectionner Rechercher un pilote approprié pour mon périphérique (recommandé) et cliquez sur Suivant . Sélectionnez (dans la prochaine fenêtre) Emplacement spécifique et cliquez sur Suivant. 3. Cliquez après sur Parcourir pour atteindre l’emplacement des pilotes.
FRANCAIS 8. Cliquez sur Démarrer, après sur Panneau de Configuration, puis sur Performances et Maintenance et après sur Système puis sur l’onglet Matériél et enfin sur Gestionnaire de périphériques. Dans le type Cartes réseau a été ajouté I-Storm USB ADSL Wan Adapter et dans le type Controller USB(Universal Serial Bus) a été ajouté I-Storm USB ADSL Modem. 1.6.3 Windows XP 1. Insérez le CD fourni et allumez l’ordinateur.
FRANCAIS 5. À ce stade les pilotes ont été installés avec succès, vous devriez pouvoir maintenant voir dans la barre des tâches, une nouvelle icône (dans l'illustration dessous). 6. Cliquez sur Démarrer, après sur Panneau de Configuration. Vous trouverez ici I-Storm ADSL Wan adapter. Sur le bureau il y a : ADSL Configuration et ADSL Easy Dial-up(si vous avez installé le pilote WAN). 7.
FRANCAIS 1.7 Configuration Générale Faire référence aux instructions suivantes: 1. Cliquez sur Démarrer, après sur Configuration et enfin sur I-Storm adapter. Sinon, sur le bureau, vous cliquer sur ADSL Configuration. suivante apparaîtra.
FRANCAIS 2. 3. Tapez [Alt]+[P] pour accéder à la configuration. La fenêtre suivante s’affiche. Cliquez sur l’onglet Configuration du Protocol (or Protocol Setup). Pour le choix des VPI/VCI les combinaisons possibles sont : [VPI=8,VCI=35], [VPI=8,VCI=67], [VPI=2,VCI=32]. Cependant, ils peuvent être amenés à changer sur l’initiative de votre FAI. Choisissez après le type de protocole utilisé par votre FAI :PPP over ATM VCMUX (RFC 2364) si vous avez le protocole PPPoA.
FRANCAIS 4. Cliquez enfin sur OK pour terminer la configuration. NB : Attention si ces valeurs sont fausses le modem ne fonctionnera pas correctement (de toute façon l'alignement correct peut se vérifier). En cas de doutes demandez confirmation à votre fournisseur d’accès. 1.8 Configuration DRIVER LAN (RFC1577, 1483) 1.8.1 Windows 98 / Me 1. Panneau de Configuration, double-cliquez sur l’ icône Reseau. 2. Sélectionnez TCP/IP-> Conexant USB-ADSL LAN Adapter. Cliquez sur Propriétés.
FRANCAIS 3. Dans l’onglet Adresse IP configurez les paramètres (en utilisant les informations fournies par votre FAI). Introduisez l’adresse IP et le masque de sousréseau.
FRANCAIS 4. Dans l’onglet Passerelle, remplissez les champs suivant les caractéristiques de votre abonnement ADSL.
FRANCAIS 5. Dans l’onglet DNS, renseignez les champs (en introduisant les adresses IP des serveurs DNS). Pour terminer cliquez sur OK.
FRANCAIS effet. 1.8.2 Windows 2000 / XP 1. Panneau de Configuration, double-cliquez sur l’ icône Accès Réseau. 2. Faites un clic droit sur la connexion au réseau local et cliquez sur propriétés. 3. Sélectionnez le protocole TCP/IP, et cliquez sur propriétés.
FRANCAIS 4. Sous l’onglet Général, sélectionnez Utiliser l’adresse IP suivante et après configurez l’adresse IP suivant les informations données par votre FAI (avant). Dans l’onglet DNS sélectionnez Utiliser l’adresse de Serveur DNS suivante et après renseignez les champs (en introduisant les adresses IP des serveurs DNS). Pour terminer cliquez sur OK.
FRANCAIS 79
FRANCAIS 1.9 Configuration DRIVER WAN (PPPoA, PPPoE) 1. 2. 3. Effectuez un double-clic sur ADSL Easy Dial-up, introduisez le Nom d’utilisateur et le Mot de passe (les paramètres d’identification indiqués par votre FAI.) Cliquez enfin sur Numéroter. Si les paramètres sont exacts, la connexion s’établit en quelques secondes. La fenêtre de connexion disparaît automatiquement. Vous pouvez trouver, a droite de la barre des tâches, l’indicateur de la connexion.
FRANCAIS 81
FRANCAIS 1.10 Support Pour tout problème vous pouvez contacter le service gratuit: l'help desk téléphonique d'Atlantis Land qui vous fournira une assistance du lundi au vendredi de 9.00 à 13.00 et de 14.00 à 18.00. Vous pouvez aussi nous contacter par fax ou par messagerie électronique (info@atlantis-land.com ou bien tecnici@atlantis-land.com) pour exposer d'éventuelles demandes ou problèmes : Atlantis Land France 57 Rue d’Amsterdam 75008 Paris Italy Tel: +33.(0)1.53321711 Fax: +33.(0)1.