User manual

ENGLISH

2. The main screen will appear as below, and it starts to

search the connected print server within the network.

1. Device List: Display the connected print server within

the network.

2. Control Buttons: Setup Wizard, Change IP Address,

Update Firmware, Show Web Setup, Factory Reset,

Print Test, Discover Device, About, and Close.

3. Information Field: Display the basic information of the

selected print server in the Device List.

4. Status Bar: Display the system status.

Before you can print over the network using your print

server, you may need to perform some basic setup tasks

through PS-Utility. These settings include:

• Change the print server’s IP Address: clicking the

Change IP Address button will bring up a dialog

box that allows you to change the IP Address of

selected print server.