User's Manual

Wireless Multi-Function Access Point
A02-AP-W54 Pag. 31
3.8 Tools
This function will help you to upgrade the firmware of the AP:
1. Please download last firmware from www.atlantis-land.com
2. Press
Upgrade Firmware
3. Press Next
4. Type the firmware file that you need to upgrade inside the dialog box, or
press the
Browse
(or
Sfoglia
) button to find the firmware file location.
5.
Press
Upgrade
button to proceed the upgrade procedure.
When finish uploading the file to the AP, do not power off the AP until the
“Firmware Upgrade Complete” screen appears.
Press the
Reset
button on the rear panel of the AP, to set back to factory default
setting.
Do NOT upgrade firmware on any Atlantis Land product over a wireless
connection. Failure of the device may result. Use only hard-wired network
connections.
After upgrading you must reset the router to factory default settings, then
manually re-enter your settings.
Please pay attention. In case electrical shutdown, during this procedure,
this product could be not usable.
When uploading software to theWireless Multi-Function Access Point, it is
important not to interrupt the Web browser by closing the window or
loading a new page. If the browser is interrupted, it may corrupt the
software