VoIP Router User's Manual

VoIP ROUTER ADSL
27
Encapsulation: There are eleven ways ─ PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA
VC-Mux, PPPoA LLC, 1483 Bridged IP VC-Mux, 1483 Bridged IP LLC, 1483 Routed IP VC-
Mux, 1483 Routed IP LLC, Classical IP over ATM, Native ATM ─ for the device to have a public
IP address and then to access Internet. You have to check with your ISP about which way is
adopted.VPI: Consult the telephone company to get the Virtual Path Identifier (VPI) number. The
default value is 0.
ATM
VPI: Consult the telephone company to get the Virtual Path Identifier (VPI) number. The default
value is 0.
VCI: Consult the telephone company to get the Virtual Channel Identifier (VCI) number. The
default value is 32.
Service Category: Select UBR or CBR.
DHCP Client
DHCP Client: Check to enable the DHCP client function if you want the device to get an IP
address automatically from your ISP.
Host Name: Enter the name of your work group.
MAC Spoofing
MAC Spoofing: The MAC Spoofing is for solving the scenario when the ISP only recognizing the
specified MAC address.
Static IP Settings
IP Address: Enter the information provided by your ISP.
Subnet Mask: Enter the information provided by your ISP.
Default Gateway: Enter the gateway address provided by your ISP.
PPP
If your encapsulation is set to be PPPoE or PPPoA, the following fields must be entered.
Service Name: This item is for identification purpose. If it is required, your ISP will provide you
the information. Maximum input is 31 alphanumeric characters.
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Disconnect Timeout seconds: Auto-disconnect the ADSL Router when there is no activity on the