VoIP Router User's Manual

VoIP ROUTER ADSL
40
RedialTimer: indicate the time period through which the dial tone is heard once the phone is lifted
off the hook. At the end of this period, if no digits have been pressed, VoIP device will start playing
fast-busy tone.
AlertTimer: indicate the time for which VoIP device will play the ring when an incoming call has
arrived and phone is on-hook. After this time period, the VoIP device will stop the ring
automatically and reject the incoming call.
DisconnectTimer: indicate the time for which the fast-busy tone is played once a call has been
disconnected by remote end. At the end of this time, the Warble tone will be played until the user
hangs up the phone.
RingBackTimer: Indicate the time period for which the VoIP device will wait while the ring back
tone is been played for the final response from the other end point once an outgoing call has been
made and the initial response has been received.
CallProgressTimer: indicate the time period for which VoIP device will wait for initial response
from the other end point once an outgoing call has been made.
CallWaitingTimer: indicate the time period for which the call-waiting tone will be played when an
incoming call arrives in the connected state.
CallFwdNoAnsTimer: indicate the time period for which the call will be forwarded when no
answered by anyone. This timer is applicable when “call forward on no answer” is enabled.
3.6.3.4 System
There are five items under the System section: Password, Time Zone, Upgrade, Factory Setting and
Restart.