WebRunner PCI V.90/V.92 56K Modem MULTILANGUAGE MANUAL

ENGLISH
20
• Personal Computer Pentium 233Mhz (or above)
• 64MB Ram
• Slot PCI V2.1/ 2.2
• CDRom
• SO Windows 98/ME/2000/XP or Linux OS (kernel 2.4 e kernel
2.6)
• 10MB on HD
1.5 Software Installation
1. Turn off the system and unplug your system from the power supply.
2. Remove the system cover. Refer to your housing manual for
instructions.
3. Locate an empty PCI slot on the system board.
4. Check your modem card model.
5. Plug the telephone cable into the LINE jack located at the front of the
bracket. Plug the other end of the telephone cable into a telephone line
jack.
6. Turn your computer on.
POWER OFF YOUR COMPUTER AND ANY
CONNECTED DEVICES BEFORE INSTALLING
YOUR MODEM !!!
You need to a remove any existing modem installed in
your computer. If your modem is non Plug-and-Play,
you need to de-install its modem driver before you
remove it. Check your existing modem documentation
for details on this.