Installation guide

defaults. After the device has turned on (turn on the

power and wait 3 minutes), press and hold reset

button for 5/10 seconds, then release it to reset it

(this is used when you can not login to the

DiskMaster, e.g. forgot the password.

14 Cool FAN PWM Coolin

FAN. Leave at least 10cm of space at

the rear of the device for ventilation.

There is a Reset button on the back of DiskMaster which will

help return its IP, System ID, System Password and DHCP to

their factory default values. Hold at least 5 secs to restore to

Default.

In order to obtain a full reset please click Reset button here

System->Hard Disk Management->Hard Disk

Configuration.

1.6 Led Display

LED Color MEANING

Power

Green Power ON.

LAN

Green

 OFF: LAN Disconnected

 ON/Flashing: Connected by LAN and

Accessing

USB 1

Green

 OFF: USB Device Failure or Missing

 ON/Flashing: Device Ready/ Data Accessing

USB 2

Green

 OFF: USB Device Fail or Missing

 ON/Flashing: Device Ready/ Data Accessing

HDD A

(Link)

Orange

 OFF: HDD Missing

 ON: HDD Installed

HDD A

(ACT/Stat)

Blue

 OFF: HDD Missing or Failure

 Normal Flashing: Data Accessing

 Slow Flashing: RAID 1 Rebuild

 Flashing 3/Slow, 3/Fast: RAID Error