Router User Manual

WebShare 111/141
A02-RA111 / A02-RA141 Pag. 8
2.3 The Rear Ports
Ports Meaning
ADSL
Connect the supplied RJ-11 (“telephone”) cable to this
port when connecting to the ADSL/telephone network.
LAN
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one
of the four LAN ports when connecting to a PC or an
office/home network of 10Mbps or 100Mbps.
There are 4 FE ports on WebShare 141 or 1 FE port on
WebShare 111.
Reset
After the device is powered on, press it to reset the
device or restore to factory default settings.
• 0-3 seconds: reset the device
• 3-5 seconds: no action
• Over 10 seconds: restore to factory default
settings (this is used when you can not login to
the router, e.g. forgot the password).
POWER (jack)
Connect the supplied power adapter to this jack.
2.4 Cabling
The most common problem is bad cabling or ADSL line. Make sure that all
connected devices are turned on. On the front of the product is a bank of LEDs.
As a first check, verify that the LAN Link, ADSL, PWR, SYS LEDs are lit.
If they are not, verify that you are using the proper cables.