Use and Care Guide

Step 1: Choose your guer and roof conguraon

Select the diagram on page 2 or 3 that best resembles your gutter and roof configuration. This will deter-

mine your recommended installation method. Once you have selected a diagram, continue to Step 2 begin-

ning on page 4.

Guer

Fascia

wood

Traditional gutter and roof configuration:

Slide gutter guard under roof shingles. If your

roofing material is adhered to your underlay-

ment, do not use this method, use either bend-

ing method in Diagram B to install your gutter

guard.

DIAGRAM B

Gutter hung low: Bend mesh either up or down, which-

ever you prefer, then fasten to the gutter, drip edge or

fascia with screws.

Guer

Fascia

wood

OPTION 1:

Bend mesh up

OPTION 2:

Bend mesh down

DIAGRAM C

Steep roof: Slide it under the roof shingle, if it causes the roof shingle

to ramp up or your roofing material is adhered to your underlayment,

see diagram F and bend the mesh up or down and fasten to the gutter,

drip edge or fascia with screws.

Guer

Fascia

wood

OPTION 1:

Bend mesh up

OPTION

DIAGRAM A