Brochure
Cast Iron Piston Air Compressors 5
Technical Specications
CR Professional Series - Standard
*Voltages available from 200-575 volt
Description Horsepower
Tank ACFM LxWxH Weight
Gallons @ 100psi @ 175psi inches lbs.
CR5-OTS-80GV - Vertical 5 80V 15.1 14.5 32x26x75 554
CR5-TS-80GV - Vertical 5 80V 17.9 17.2 32x26x75 554
CR7.5-TS-80GV - Vertical 7.5 80V 23.8 22.6 32x26x75 599
CR10-TS-120GV - Vertical 10 120V 35.9 35 40x30x77 845
CR10-TS-120GH - Horizontal 10 120H 35.9 35 72x28x54 845
CR-TS-30GH-13HG - 13 HP Honda Gas Unit 13 30 23.5 22.6** 41x23x42 465
CR-TS-30GH-14KG - 14 HP Kohler Gas Unit 14 30 23.5 22.6** 42x24x41 465
CR15-TS-120GH - Horizontal 15 120H 54.4 51 70x28x54 870
CR Professional Series - Standard and Packaged TEFC motor upgrade/NEMA4 control panel
Description Horsepower
Tank ACFM LxWxH Weight
Gallons @ 100psi @ 175psi inches lbs.
CR5-TS-80GV-3PH-PS,TN4 - Vertical 5 80V 17.9 17.2 32x26x75 554
CR7.5-TS-80GV-3PH-PS,TN4 - Vertical 7.5 80V 23.8 22.6 32x26x75 599
CR10-TS-120GV-3PH-PS,TN4 - Vertical 10 120V 35.9 35 40x30x77 845
CR10-TS-120GV-3PH-PS,TN4 - Horizontal 10 120H 35.9 35 72x28x54 845
CR15-TS-120GV-3PH-PS,TN4 - Horizontal 15 120H 54.4 51 70x28x54 870
CR Professional Series - Packaged Duplex
** - Single phase units stop at 7.5HP
Description Horsepower
Tank ACFM LxWxH Weight
Gallons @ 100psi @ 175psi inches lbs.
CR5-TS-120GH-3PH-PPS-D - Horizontal 5*2 = 10 HP 120H 35.9 35 77x30x52 1000
CR7.5-TS-120GH-3PH-PPS-D - Horizontal 7.5*2 = 15 HP 120H 54.4 51 77x30x52 1300
CR10-TS-200GH-3PH-PPS-D - Horizontal 10*2 = 20 HP 200H 71.8 70 78x46x63 2200
• Two-stage
– Two stage best for high demands needing
up to 175 psi.
• Oversized oil reservoir for low oil temperatures,
industrial class bearings and one-piece aluminum head
for heat dissipation providing longevity.
• Low Maintenance with 2-piece connecting rods and oil
pressure gauge.
• High eciency intercooler with stainless steel valve
design for highest volumetric eciency.