Product Manual

6.8 Safety valves
Location of safety valve
Testing
The safety valve (SV) test can only be performed by authorized personnel and is protected
by a security code.
Refer to Elektronikon® Graphic controller, Test menu
If the safety valve does not open at the set pressure stamped on the valve, it needs to be replaced.
Warning
No adjustments are allowed. Never run the compressor without safety valve.
6.9 Service kits
Service kits
For
overhauling and for preventive maintenance, a wide range of service kits is available. Service kits comprise
all parts required for servicing the component and offer the benefits of genuine Atlas Copco parts while
keeping the maintenance budget low.
Also a full range of extensively tested lubricants, suitable for your specific needs is available to keep the
compressor in excellent condition.
Consult the Spare Parts List for part numbers.
6.10 Storage after installation
Procedure
Run the compressor regularly, e.g. twice a week, until warm.
Instruction book
2920 7110 00 99