Product Manual

If necessary, change the other settings as required in the same way as described above.
Indirect stop:
occurs when the pressure rises to the pre-set Indirect stop setpoint (= setpoint plus Indirect stop
level). The motor will decelerate to minimum speed and the compressor will switch to unloaded condition.
Direct stop: occurs when the compressor runs at a speed between minimum and maximum and the net pressure
rises above the direct stop setpoint (= setpoint plus Direct stop level).
Both
settings (Indirect stop level and Direct stop level) are programmable, see section Programmable settings.
3.12 Event history menu
Control panel
(1) Scroll keys
(2) Enter key
(3) Escape key
Menu icon, Event History
Function
To call up the last shut-down and last emergency stop data.
Procedure
Starting from the Main screen,
•
Move the cursor to the action button Menu and press the Enter key. Following screen appears:
Instruction book
48 2920 7110 00