Product Manual
Table Of Contents
- Table of contents
- 1 Safety precautions
- 2 General description
- 3 Elektronikon Base Controller
- 3.1 ElektronikonTM Base Controller
- 3.2 Control panel
- 3.3 Icons used on the display
- 3.4 Main screen
- 3.5 Main function
- 3.6 Shutdown warning
- 3.7 Shutdown
- 3.8 Service warning
- 3.9 Scrolling through all screens
- 3.10 Calling up running hours
- 3.11 Calling up motor starts
- 3.12 Calling up module hours
- 3.13 Calling up loading hours
- 3.14 Calling up load solenoid valve
- 3.15 Calling up/resetting the service timer
- 3.16 Calling up/modifying pressure band selection
- 3.17 Calling up/modifying pressure band settings
- 3.18 Calling up/modifying the unit of temperature
- 3.19 Calling up/modifying the unit of pressure
- 3.20 Calling up/modifying backlight time
- 3.21 Activating automatic restart after voltage failure
- 3.22 Keyboard lock
- 4 Installation
- 5 Operating instructions
- 6 Maintenance
- 7 Adjustments and servicing procedures
- 8 Problem solving
- 9 Technical data
- 10 Instructions for use
- 11 Guidelines for inspection
- 12 Pressure equipment directives
- 13 Declaration of conformity
6.3 Oil specifications
Never mix oils of different brands or types as they may not be compatible and the oil mix
will have inferior properties. A label, indicating the type of oil filled ex-factory, is stuck on
the air receiver/oil tank.
It is strongly recommended to use Atlas Copco lubricants. See section Preventive maintenance schedule for
recommended oil change intervals.
For part numbers, consult the Spare Parts List.
Roto-Inject Fluid
Atlas Copco's Roto-Inject Fluid is a specially developed lubricant for use in single stage oil-injected screw
compressors. Its specific composition keeps the compressor in excellent condition. Roto-Inject Fluid can be
used for compressors operating at ambient temperatures between 0 ˚C (32 ˚F) and 40 ˚C (104 ˚F). If the
compressor is regularly operating in ambient temperatures between 40 °C and 46 °C (115 °F), oil lifetime
is reduced significantly. In such case it is recommended to use Roto-Xtend Duty Fluid.
Roto-Xtend Duty Fluid
Atlas Copco's Roto-Xtend Duty Fluid is a high quality synthetic lubricant for oil-injected screw
compressors which keeps the compressor in excellent condition. Because of its excellent oxidation
stability, Roto-Xtend Duty Fluid can be used for compressors operating at ambient temperatures between 0
˚C (32 ˚F) and 46 ˚C (115 ˚F).
6.4
Oil, filter and separator change
Important
Never mix oils of different brands or types. A label, indicating the type of oil filled ex-
factory, is stuck on the air receiver/oil tank.
Always drain the compressor oil at all drain points. Used oil left in the compressor can
shorten the lifetime of the new oil.
If the compressor is exposed to external pollutants, is being used at high temperatures
(oil temperature above 90˚C / 194˚F) or is being used under severe conditions, it is
advisable to change the oil more frequently. Consult Atlas Copco.
Instruction book
62 2920 7191 00