Product Manual

Table Of Contents
7.4 Belt set exchange and tensioning
Read the warning in the Preventive maintenance schedule
section.
Checking the belt tension on G7, G11 and G15
Step Action
1 Stop the compressor, close the air outlet valve and switch off the voltage
2 Remove the front door and the internal panel.
3 The force and deflection varies with the power of the unit, and with the total running
hours of the belt.
The values to be measured are indicated with a sticker (1) on the frame:
4 Refit the bodywork panels.
Instruction book
2920 7191 00 69