Product Manual
Table Of Contents
- Table of contents
- 1 Safety precautions
- 2 General description
- 3 Controller
- 3.1 General
- 3.2 Control panel
- 3.3 Icons used
- 3.4 Main screen
- 3.5 Calling up menus
- 3.6 Shutdown warning
- 3.7 Shutdown
- 3.8 Inputs menu
- 3.9 Outputs menu
- 3.10 Counters
- 3.11 Control mode selection
- 3.12 Service menu
- 3.13 Setpoint menu
- 3.14 Event history menu
- 3.15 General settings menu
- 3.16 Info menu
- 3.17 Week timer menu
- 3.18 Test menu
- 3.19 User password menu
- 3.20 Web server
- 3.21 Programmable settings
- 4 Installation guidelines
- 5 Operating instructions
- 6 Maintenance
- 7 Adjustments and servicing procedures
- 8 Problem solving
- 9 Technical data
- 10 Guidelines for inspection
- 11 PED (Pressure Equipment Directive)
- 12 Declaration of conformity
Text on image
(1) Element(s) (4) Problem Element
(2) Warning Element 2 (5) More
(3) Triggered (6) Reset
Each time an element is reset manually, this will be logged in the Element Problem Reset
counter:
Counter screen where one element was reset manually
Text on image
(1) Information (4) Element Warnings
(2) Trigger level (5) Element Problem Resets
(3) High Temperature Warnings (6) Modify
High ambient temperature
If the ambient temperature is above the factory setting (40 °C - 104 °F), a warning is triggered
and a warning icon (1) is shown on the main screen:
Main screen with high ambient temperature warning
Text on image
(1) Compressor outlet (pressure) (3) Load
(2) Warning icon (4) Menu
Instruction book
2920 7140 52 37