Product Manual
Table Of Contents
- Table of contents
- 1 Safety precautions
- 2 General description
- 3 Controller
- 3.1 General
- 3.2 Control panel
- 3.3 Icons used
- 3.4 Main screen
- 3.5 Calling up menus
- 3.6 Shutdown warning
- 3.7 Shutdown
- 3.8 Inputs menu
- 3.9 Outputs menu
- 3.10 Counters
- 3.11 Control mode selection
- 3.12 Service menu
- 3.13 Setpoint menu
- 3.14 Event history menu
- 3.15 General settings menu
- 3.16 Info menu
- 3.17 Week timer menu
- 3.18 Test menu
- 3.19 User password menu
- 3.20 Web server
- 3.21 Programmable settings
- 4 Installation guidelines
- 5 Operating instructions
- 6 Maintenance
- 7 Adjustments and servicing procedures
- 8 Problem solving
- 9 Technical data
- 10 Guidelines for inspection
- 11 PED (Pressure Equipment Directive)
- 12 Declaration of conformity
4 Installation guidelines
4.1
Dimension drawing
The dimension drawings can be found on the DVD or the USB, supplied with the compressor.
Model Dimension drawing number
SF 15+, SF 17+, SF 22+ metric 9820 7460 00–01
SF 15+, SF 17+, SF 22+ imperial 9820 7460 00–02
SFD 11+, SFD 15+, SFD 22+ metric 9820 7503 00–01
SFD 11+, SFD 15+, SFD 22+ imperial 9820 7503 00–02
Hereby a list of commonly used terms with their translation:
Text on drawings Translation or Explanation
COOLING AIR OUTLET OF AFTERCOOLER
AND DRYER
Cooling air outlet of aftercooler and dryer
COOLING AIR OUTLET OF COMPRESSOR Cooling air outlet of the compressor
AMBIENT SENSOR Sensor to measure the ambient temperature
CABINET VENTILATION Ventilation outlet opening for cabinet
COMPRESSED AIR OUTLET Compressed air outlet
ELECTRIC CABLE PASSAGE / POWER
SUPPLY CABLE
Opening for power supply cable
MANUAL DRAIN Manual drain valve
AUTOMATIC DRAIN Automatic drain outlet
CENTER OF GRAVITY Location of center of gravity
COOLING AIR INLET OF AFTERCOOLER AND
DRYER
Cooling air inlet of aftercooler and dryer
COOLING AIR INLET OF COMPRESSOR AND
CABINET
Cooling air inlet for compressor and cabinet
COMPRESSOR MOUNTING HOLES Location of anchoring points to fixate the compressor
CENTER OF GRAVITY DIMENSIONS AND
MASS
Location of the center of gravity and mass
4.2 Installation proposal
Outdoor/altitude operation
If the compressor is installed outdoors or if the air inlet temperature can be below 0 °C
(32 °F), precautions must be taken. In this case, and also if operating at high altitude,
consult Atlas Copco.
Instruction book
76 2920 7140 52