Product Manual
Table Of Contents
- Table of contents
- 1 Safety precautions
- 2 General description
- 3 Controller
- 3.1 General
- 3.2 Control panel
- 3.3 Icons used
- 3.4 Main screen
- 3.5 Calling up menus
- 3.6 Shutdown warning
- 3.7 Shutdown
- 3.8 Inputs menu
- 3.9 Outputs menu
- 3.10 Counters
- 3.11 Control mode selection
- 3.12 Service menu
- 3.13 Setpoint menu
- 3.14 Event history menu
- 3.15 General settings menu
- 3.16 Info menu
- 3.17 Week timer menu
- 3.18 Test menu
- 3.19 User password menu
- 3.20 Web server
- 3.21 Programmable settings
- 4 Installation guidelines
- 5 Operating instructions
- 6 Maintenance
- 7 Adjustments and servicing procedures
- 8 Problem solving
- 9 Technical data
- 10 Guidelines for inspection
- 11 PED (Pressure Equipment Directive)
- 12 Declaration of conformity
9 Technical data
9.1
Electric cable size and fuses
• The voltage on the compressor terminals must not deviate more than 10% of the
nominal voltage.
It is however highly recommended to keep the voltage drop over the supply cables
at nominal current below 5% of the nominal voltage (IEC 60204-1).
•
If cables are grouped together with other power cables, it may be necessary to use
cables of a larger size than those calculated for the standard operating conditions.
• Use the original cable entry, indicated on the dimension drawings.
To preserve the IP protection degree of the electric cubicle and to protect its
components from dust from the environment, it is mandatory to use a proper
cable gland when connecting the supply cable to the compressor.
• Local regulations remain applicable if they are stricter than the values proposed
below.
• Caution:
• Always double-check the fuse size versus the calculated cable size. If
required, reduce fuse size or enlarge cable size.
• Cable length should not exceed the maximum length according to IEC 60204
table 10.
Currents and fuses
Compressor type I
tot
(1) Max
fuse (1)
I
tot
(2) Max
fuse (2)
Q21/Q2
2/Q23/
Q24
Q15
SF 15
+
IEC 50 Hz 230 V 55 A 63 A 60 A 80 A 15.0 A
SF 15
+
IEC 60 Hz 380 V 32 A 40 A 37 A 50 A 8.9 A
SF 15
+
IEC 50 Hz 400 V 32 A 35 A 35 A 50 A 8.7 A
SF 15
+
IEC 50 Hz 400 V + N 32 A 35 A 37 A 50 A 8.7 A
SF 15
+
UL/cUL 60 Hz 200 V 60 A 70 A 68 A 80 A 16.6 A
SF 15
+
UL/cUL 60 Hz 230 V 55 A 70 A 62 A 80 A 15.0 A
SF 15
+
UL/cUL 60 Hz 460 V 28 A 35 A 31 A 40 A 8.0 A
SF 15
+
UL/cUL 60 Hz 575 V 21 A 30 A 24 A 35 A 5.9 A
Compressor type I
tot
(1) Max
fuse (1)
I
tot
(2) Max
fuse (2)
Q21/Q2
2/Q23/
Q24
Q15
SF 17
+
IEC 50 Hz 230 V 64 A 80 A 69 A 80 A 23.3 A 0.38 A
SF 17
+
IEC 60 Hz 380 V 40 A 50 A 44 A 50 A 14.5 A 0.26 A
SF 17
+
IEC 50 Hz 400 V 37 A 50 A 40 A 50 A 13.4 A 0.22 A
SF 17
+
IEC 50 Hz 400 V + N 37 A 50 A 44 A 50 A 13.4 A 0.22 A
SF 17
+
UL/cUL 60 Hz 200 V 76 A 90 A 84 A 100 A 25.0 A 0.74 A
SF 17
+
UL/cUL 60 Hz 230 V 66 A 80 A 73 A 90 A 24.0 A 0.26 A
Instruction book
96 2920 7140 52