Product Manual

3.19 Modifying pressure band selection
Control panel
Starting from the Main screen:
• Press the Scroll buttons (12) until <P.5> is shown and then press the Enter button (13). The active
pressure band 1 <Pb.1> is shown on the display.
• Press the Enter button (13) to modify the pressure band selection (a password may be required). The
active pressure band <Pb.1> starts blinking.
• Press Scroll buttons (12) to modify the active pressure band. Press the Enter button (13) to confirm or
the Escape button (14) to cancel.
3.20 Calling up/modifying service timer settings
Control panel
Starting from the Main screen:
•
Press the Scroll buttons (12) until <P. 6> is shown and then press the Enter button (13): the setting of
the service timer is shown in <hrs> (hours) or <x1000 hrs> (hours x 1000). Example: <4000 hrs>
means the timer is set at 4000 running hours.
• Press the Enter button (13) to modify this value (a password may be required): the value blinks. Use
the Scroll buttons (12) to modify the setting.
• Press the Enter button (13) to program the new value.
Instruction book
48 2920 7110 21