Product Manual
Table Of Contents
- Table of contents
- 1 Safety precautions
- 2 General description
- 3 Elektronikon controller
- 3.1 General description
- 3.2 Control panel
- 3.3 Icons used on the display
- 3.4 Main screen
- 3.5 Shut-down warning
- 3.6 Shut-down
- 3.7 Service warning
- 3.8 Scrolling through all screens
- 3.9 Calling up element and dew point temperatures
- 3.10 Digital inputs
- 3.11 Calling up running hours
- 3.12 Calling up motor starts
- 3.13 Calling up module hours
- 3.14 Calling up/resetting the service timer
- 3.15 Selection between Local, Remote or LAN control
- 3.16 Calling up/modifying CAN address control
- 3.17 Calling up/modifying IP, Gateway and Subnetmask
- 3.18 Calling up/modifying pressure band settings
- 3.19 Modifying pressure band selection
- 3.20 Calling up/modifying service timer settings
- 3.21 Calling up/modifying unit of temperature
- 3.22 Calling up/modifying unit of pressure
- 3.23 Automatic restart after voltage failure
- 3.24 Activating password protection
- 3.25 Calling up/modifying protection settings
- 3.26 Test screens
- 3.27 Web server
- 3.28 Programmable settings
- 4 Elektronikon Graphic Controller
- 4.1 General
- 4.2 Control panel
- 4.3 Icons used
- 4.4 Main screen
- 4.5 Calling up menus
- 4.6 Shutdown warning
- 4.7 Shutdown
- 4.8 Inputs menu
- 4.9 Outputs menu
- 4.10 Counters
- 4.11 Control mode selection
- 4.12 Service menu
- 4.13 Setpoint menu
- 4.14 Event history menu
- 4.15 General settings menu
- 4.16 Info menu
- 4.17 Week timer menu
- 4.18 Test menu
- 4.19 User password menu
- 4.20 Web server
- 4.21 Programmable settings
- 5 Installation
- 6 Operation
- 7 Preventive maintenance
- 8 Adjustments and servicing procedures
- 9 Problem solving
- 10 Technical data
- 11 Instructions for use
- 12 Guidelines for inspection
- 13 Pressure equipment directives
- 14 Declaration of conformity
• ES screen controller: If an ESi license is provided, the button ES is shown in the navigation menu.
At the left, all compressors in the ES are shown and, at the right side, the ES status is shown.
3.28 Programmable settings
Parameters: starting/stopping pressures for Pack compressors
Parameter Unit Minimum
setting
Factory
setting
Maximum
setting
Starting pressure
Starting pressure (8 bar compressors) bar(e) 0.5 6 8
Starting pressure (8 bar compressors) psig 7.2 87 116
Starting pressure (10 bar compressors) bar(e) 0.5 8 10
Starting pressure (10 bar compressors) psig 7.2 116 145
Stopping pressure
Stopping pressure (8 bar compressors) bar(e) 0.5 8 8
Stopping pressure (8 bar compressors) psig 7.2 116 116
Stopping pressure (10 bar compressors) bar(e) 0.5 10 10
Stopping pressure (10 bar compressors) psig 7.2 145 145
Parameters: starting/stopping pressures for FF compressors
Parameter Unit Minimum
setting
Factory
setting
Maximum
setting
Starting pressure
Starting pressure (8 bar compressors) bar(e) 0.5 5.8 7.8
Starting pressure (8 bar compressors) psig 7.2 84 113
Starting pressure (10 bar compressors) bar(e) 0.5 7.8 9.8
Instruction book
2920 7110 21 59