User manual

2920 1475 00
13
Instruction book
Fig. 1.11 Menu flow
Compressor Outlet 6.4 bar
Automatically Loaded
↓
Menu Unload
Automatic Operation
Local Control
Week Timer Active ↓
Mainscreen Help Extra
Maximum Pressure 8.3 bar ↑
Running Hours 1016 hrs
Loaded Hours 980 hrs ↓
Mainscreen Help Extra
Status Data →
Measured Data
Counters ↓
Mainscreen
All Conditions Are OK
Menu Help
Status Data ↑
Measured Data →
Counters ↓
Mainscreen
Compressor Outlet 5.4 bar
Dp Oil Separator 1.1 bar
Dp Air Filter 0.02 bar ↓
Menu
Measured Data ↑
Counters →
Test ↓
Mainscreen
Counters ↑
Test →
Modify Parameters ↓
Mainscreen
Test ↑
Modify Parameters →
Service ↓
Mainscreen
Modify Parameters ↑
Service →
Saved Data ↓
Mainscreen
Running Hours 1016 hrs
Loaded Hours 980 hrs
Motor Starts 945 number ↓
Menu
Loading Pressure 6.4 bar
Unloading Pressure 7.0 bar
Loading Pressure 2 6.0 bar ↓
Menu Modify
Compressor Outlet 5.4 bar
Dp Oil Separator 1.1 bar
Dp Air Filter - 0.011 bar ↓
Menu
Parameters ↑
Protections →
Service Plan ↓
Menu
Service Timer
Running Hours →
130 hrs ↓
Menu
Service Timer
Running hours →
130 hrs ↓
Menu
Modify Parameters ↑
Service
Saved Data →
Mainscreen
Last Shutdown 1 →
Last Shutdown 2
Last Shutdown 3 ↓
Menu
52407PEN
Service Plan ↑
Clock Function →
Configuration ↓
Menu
Clock Function
Not Activated →
Menu Modify Delete
Time 10:54
Date 03/05/01
Date Format DD/MM/YY ↓
Menu Modify
-Motor Starts
-Module Hours
-Load Relay
-Compressor Outlet
-Dp oilseparator
-Dp Air Filter
-Oil injection element
-Compressor Outlet
-Element 1 Outlet
-Element 2 Outlet
-Cooling medium
-Oil Injection Element
-Compressor Outlet
-Element 1 Outlet
-Element 2 Outlet
-Cooling Medium
-Oil Separator
-Dryer LAT
-Emergency Stop
-Remote Start/Stop
-Remote LoadUnload
-Remote pressure sensing
-Overload Motor
-Overload Fanmotor
-Starter Feedback Contact
-PB1 open/ PB2 closed
-Overload Dryer/Dryer Fan
-Module Hours
-Load Relay
-Unloading Pressure 2
-Y-Time
-Load Delay
-Nr Of Starts/ Day
-Minimum Stop Time
-Programmed Stop Time
-Permisive Start Time
-Communication Time-out
Display Test →
Safety Valve Test
↓
Menu
-Oil Injection Element
-Compressor Outlet
-Element 1 Outlet
-Element 2 Outlet
-Cooling Medium
-Oil Separator
-Dryer LAT
-Emergency Stop
-Remote Start/Stop
-Remote Load/Unload
-Remote Pressure Sensing
-Overload Motor
-Overload Fanmotor
-Starter Feedback Contact
-PB1 open/ PB2 closed
-Overload Dryer/Dryer Fan
-Language In Use
-Pressure Unit
-Temperature Unit
-Vibration Unit
-Level Unit
-Pressure Band Used
-Start Mode
-CCM (control mode)
-Automatic Restart
-Password
-Node ID
-Digital Presband Selec.
Service Plan ↑
Clock Function
Configuration →
Menu
Parameters →
Protections
Service Plan ↓
Menu
-Oil separator
-Dryer LAT
-Emergency Stop
-Remote Start/Stop
-Remote Load/Unload
-Remote pressure sensing
-Overload Motor
-Overload Fanmotor
-Starter Feedback Contact
-PB 1 open/ PB2 closed
-Overload dryerdryer fan
Protections ↑
Service Plan →
Clock Function ↓
Menu