Manual

◆ Get administrator privileges:
Enter the administrator password in the "administrator password" input box at the
bottom right of the interface. After correctly entering the password, the input box
turns green. At this time, you have obtained administrator permission.
6.3.2 Parallel monitoring
◆ Interface:
Click the main interface tab [Multi Monitoring] to enter the interface.
◆ To the Bottom:
Check "To the Bottom" at the bottom left to display the monitored real-time data in
the data area. Note: this function only displays the data on the interface, and the data
has not been saved.
◆ Clear interface data:
Click the button "CLS" to clear the real-time data on the interface.
◆ Record data
Check "Data save to database" to start recording data. When there is data recording,
the number of saved data will appear on the right.
◆ Export data
Click the "Export " button to export the recorded real-time data. You can also export
on the export data page.
6.3.3 Store information.
◆ Interface:
Click the main interface tab [Memor y Info.] to enter the interface.
◆ Read / write BMS time:
Click the "Read BMS" button on the upper right to read the BMS time.
Click the "Write To BMS" button on the upper right to write the BMS time.
◆ Storage settings:
Range: start sequence number and maximum sequence number.
Read records: read stored records.
23