Manual

6.4 Replacing inverter protocol on battery monitoring(Optional)
Software running environment
This function can only be realized by installing the protocol conversion board.
Before using this function, please confirm whether the protocol conversion board
is installed on this battery.
This software does not need to be installed independently, but only needs to meet
the environment. Double click the main program icon to run it.
◆ Connect the computer to the battery via the USB-RS485 communication cable.
◆ Setting for DID.
◆ Click to open the Inverter software on the PC.
◆ Select the right serial port.
◆ Click the “Read”button to read the current inverter code.
◆ Click the”Write” button the inverter code that you need.
◆ Click the”Read” button to read the inverter code again, and confirm whether the
operation was successful or not.
◆ Reference table of different inverter code.
26