Manual

◆ When installing the equipment, use tools to tighten the screws.
◆ Paint scratches during equipment transportation and installation must be repaired
in time. It is strictly prohibited to expose the scratched parts to the outdoor
environment for a long time.
◆ Do not open the main panel of the device without the permission of the
manufacturer.
◆ In any case, do not change the structure and installation sequence of the equipment
without the permission of the manufacturer.
◆ It is forbidden to affect the battery terminal components during handling, and it is
not allowed to lift and handle through the battery terminal bolts.
◆ It is not allowed to reverse engineer, decompile, disassemble, adapt, implant or other
derivative operations on the equipment software, and it is not allowed to study the
internal implementation of the equipment in any way.
Personal safety
◆ Wear appropriate personal protective equipment during equipment operation. In
case of any fault that may cause personal injury or equipment damage, the
operation shall be terminated immediately, the person in charge shall be reported,
and effective protective measures shall be taken.
◆ Before using the tool, please master the correct use method of the tool to avoid
personal injury and equipment damage.
◆ When the equipment is running, the shell temperature is high and there is a risk of
burns. Do not touch it.
◆ In case of battery failure, the temperature may exceed the burn threshold of the
touchable surface, and contact should be avoided.
◆ Do not open or damage the battery. The released electrolyte is harmful to the skin
and eyes. Avoid contact.
◆ Do not place irrelevant items on the top of the equipment or insert them anywhere in
the equipment.
◆ Do not place inflammables around the equipment.
◆ The battery shall not be placed in the fire to avoid explosion and endanger personal
safety.
◆ Do not place the battery module in water or other liquids.
◆ Do not short-circuit the battery terminal, which may cause combustion.
◆ The battery may cause the danger of electric shock and large
short-circuit current. When using the battery, pay attention to the following
precautions :
a) Remove watches, rings or other metal objects.
b) Tools using insulated handles .
c) Wear rubber gloves and boots .
d) Do not place tools or metal parts on the top of the battery .
e) Disconnect the charging power supply before connecting or disconnecting the
batter y terminal.
◆ Do not use water or detergent to clean the electrical parts inside and outside the
cabinet.
2