Manual

◆ Do not stand or lean on or sit on the equipment.
◆ Do not damage each module of the equipment.
◆ When installing the battery module, if the battery module falls or is strongly
impacted, the equipment will be damaged. It is strictly prohibited to continue to
use, otherwise there will be safety risks (cell leakage, electric shock injury, etc.).
Treatment measures for battery leakage
In case of electrolyte leakage, avoid contact with leaked liquid or gas.
Electrolyte is corrosive and contact may cause skin irritation and chemical burns.
In case of contact with battery electrolyte, the following measures shall be taken.
Inhalation: evacuate the contaminated area, enter fresh air immediately, and seek
medical help immediately.
Eye contact: immediately flush eyes with plenty of water for at least 15 minutes, do
not rub, and seek medical help immediately.
Skin contact: immediately wash the contact area with plenty of water and soap and
seek medical help immediately.
Ingestion: seek medical help immediately.
Fire treatment measures
◆ In case of fire, the system should be powered off under the condition of ensuring
safety.
◆ Use carbon dioxide, FM-200 or ABC dry powder fire extinguisher to extinguish the
fire.
When the battery temperature is too high, it will cause battery deformation, damage,
electrolyte overflow and toxic gas leakage. Please keep away from it to avoid skin
irritation and chemical burns.
DANGER
◆ Power down the system to ensure personal safety.
◆ If any part of the battery is flooded, do not touch the battery to avoid electric shock.
◆ Do not use the flooded battery. Contact the battery recycling company for
scrapping.
Flood emergency measures
Battery recycling
◆ Please dispose of waste batteries according to local laws and
regulations. Do not treat batteries as domestic waste.
◆ If the batter y leaks or bulges, please contact technical support or
batter y recycling company for scrapping.
◆ When the battery is unavailable beyond its service life, please contact
the battery recycling company for scrapping.
◆ Avoid exposing the battery to high temperature or direct sunlight.
◆ Avoid exposing the battery to high humidity or corrosive environment.
3