Manual

1.2 Personnel requirements
◆ The personnel responsible for the installation and maintenance of this equipment
must understand various safety precautions and master the correct operation
methods.
◆ Only qualified professionals or trained personnel are allowed to install, operate and
maintain the equipment.
◆ Only qualified professionals are allowed to dismantle safety facilities and overhaul
equipment.
◆ Personnel operating the equipment, including operators, trained personnel and
professionals, shall have the special operation qualification required by the local
state.
◆ The replacement of equipment or components (including software) must be
completed by professionals or authorized personnel.
◆ Professionals: those who have training or experience in operating equipment and
can understand the potential sources and magnitude of hazards in the process of
equipment installation, operation and maintenance.
◆ Trained personnel: personnel who have received corresponding technical training
and have necessary experience, can be aware of the risks that may be brought to
him during a certain operation, and can take measures to minimize the risks to
himself or other personnel.
◆ Operators: operators who may come into contact with the equipment other than
trained personnel and professionals.
Explanation
Before making electrical connection, please ensure that the equipment is not damaged,
otherwise electric shock or fire may be caused.
General requirements
1.3 Electrical safety
◆ All electrical connections must meet the national electrical standards.
◆ The cable provided by the user shall meet the requirements of local laws and
regulations.
◆ Use special insulating tools for high voltage operation.
DC operation
It is forbidden to install or remove the power line with electricity. When the power cord
contacts the conductor, it will produce arc or electric spark, which can lead to fire or
personal injury.
◆ Before the electrical connection of the equipment, if the live parts may be touched, the
corresponding breaking device at the front level of the equipment must be
disconnected.
◆ Before connecting the power cord, confirm that the label identification of the power
cord is correct before connecting.
DANGER
DANGER
4