Manual

AtlasSound.com – 16 –
Owner’s Manual
AA50PHD
50W Mixer Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Wiring the AAPHD Series Amplifier
• Mic/Line Input - Use 2 conductor w/ shield for low level signals; 20-22 gauge stranded wire is best. Maintain the proper
polarity, + to +, – to – , and shield to ground.
• Unbalanced Inputs and Outputs - Pre-made RCA cables can be purchased from Atlas Sound to simplify interconnection to
external devices.
• Zone 2 Out - Use 2 conductor, 20-22 gauge, shielded is best. Terminate the shield at the input to the device if possible.
• Speaker Outputs - The AAPHD Series is rated for Class 2 wiring, meaning it is not required to run the wire in conduit. Use
Class 2 rated wire, 2 conductor unshielded wire of the appropriate gauge. Contact Atlas Sound Tech Support at 1-800-876-3333
for more information on proper wire gauge selection.
Level Control Security Cover Option
In order to prevent unauthorized operation of the AAPHD Series amplifiers, optional security covers are available which take the place
of the front panel knobs. After the amp has been installed and is operating as desired, grasp the front panel knobs and pull straight out
from the front panel. Replace the knobs with security covers, Atlas Sound part number AAVCC-5, available in quantities of 5.
Front Panel
Knob
Security Cover
or
Signal Peak
Master Level
5
64
3
2
1 9
0 10
8
7
Limit Power PHD
3
5
64
3
2
1 9
0 10
8
7
2
5
64
3
2
1 9
0 10
8
7
1
5
64
3
2
1 9
0 10
8
7
AA50PHD
Professional Mixer Amplifier
Power
120V AC 60Hz 150W
L & R
Summed
Input 4
1
Input 4
Off
On
2
Input 3
Off
On
3
Input 2
Off
On
Zone 2 Assign Input 1
RIS
4
Input 1
Off
On
5
Input 4
Off
On
7
Input 2
Off
On
6
Mute RCV
Input 3
Off
On
12
NC
NC
NC
NC
11
On
Off
9
Line/Tel
Mic
8
Phantom
Off
On
10
Remote
Level
Master
Input 2,3,4
G
–
RMT
Mute
+
–
+
VOX
Sens
PA Amplifier
Model AA50PHD
Output Rated 50W
Designed and Engineered
by Atlas Sound
Made in China
CLASS 2 WIRING
COM 4Ω 25V 70V
Amplifier Output
TrebleBass
Pre Out
Amp In
Chan 2Chan 3
Sum InSum In
Level
Zone 2 - Output
Return
Remote Level
Inputs
NC2,3,4
10V 4 3 2 GNDG
Remote Input
Select (RIS)
RIS
– +
600Ω
Channel 1 - Input