Manual

– 19 – AtlasSound.com
Specifications are subject to change without notice.
Owner’s Manual
AA50PHD
50W Mixer Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
AA50PHD Specifications
Outputs
Main Transformer Coupled, Balanced, 4Ω, 25V, and 70.7V. Class 2 Rated, Removable 4 Position PHX
5.08mm pitch, Accepts up to 12 Gauge Wire, 12A Rating
Zone 2 Unbalanced 600Ω / 10kΩ, Max 1.0V Out, Removable 2 Position PHX 3.5mm Pitch, Accepts Up to
18 Gauge Wire, 8A Rating
Pre Out RCA, Unbalanced 150Ω
Technical Data
Inputs Total Qty 4
Frequency Response 80Hz-15kHz +/- 3dB
Thd+N 1% or Less, at 1kHz, Rated Output
Input Sensitivity / Impedance Input 1 Mic Mode 5mv, No Trim, 1200Ω
Input 1 Line Mode 316mV (-10dBV) 1200Ω
Input 2, 3, 4 316mV (-10dBV) 10kΩ
Input 4 3.5mm Summed, 316mV (-10dBV) 10kΩ
Signal To Noise Ratio Mic >55dB
Line >55dB
Telephone >55dB
Input 3/4 >75dB
Phantom Power 24VDC
Power Requirements
AC Mains 120V 60Hz
AC Cord 2M, 18 gauge, NEMA 5-20P
Idle Power 8.3W, .26A, 28 BTU
Average Power (
1
/3 Rated Output) 80W, .81A. 272 BTU
Max Power (20mS Burst) 130W, 1.25A, 443 BTU
Mechanical
Chassis Steel
Finish Black Paint on Front and Top
Dimensions 8.27" x 3.66" x 10.87" (210mm x 93mm x 276mm)
Weight 10 lbs (4.54kg)