Owner’s Manual AL2430-2PH Wireless Infrared Classroom Sound Reinforcement System AL2430-2PH 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 –1– Specifications are subject to change without notice. AtlasSound.
AL2430-2PH Wireless Infrared Classroom Sound Reinforcement System Owner’s Manual Table of Contents Important Safety Instructions..........................................................................................................................................3 Introduction ......................................................................................................................................................................5 Features ...................................................
fier A35 d 35W ngineered ound HINA Owner’s Manual AL2430-2PH Wireless Infrared Classroom Sound Reinforcement System Important Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
AL2430-2PH Wireless Infrared Classroom Sound Reinforcement System Owner’s Manual WARNING – When the Device is in Use • To prevent electric shock, do not remove the device cover as there are high voltage components inside. Refer all servicing to Atlas Sound. • Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the AC outlet and contact Atlas Sound.
Owner’s Manual AL2430-2PH Wireless Infrared Classroom Sound Reinforcement System Introduction Congratulations and thank you for purchasing the Atlas Sound Model AL2430-2PH Wireless Classroom Sound Reinforcement System. This new and innovative professional grade audio system has been designed from the ground up to include unique features required for delivering clear and concise audio to the classroom.
Wireless Infrared Classroom Sound Reinforcement System AL2430-2PH 3 1 2 6 7 4 8 9 Owner’s Manual 10 11 5 12 AL2430 Front Panel Description 1. Power Switch This toggle switch applies power to the AL2430. 8. Computer The gain for the Computer input is controlled by this rotary control. 2. Power LED This LED will illuminate when the AL2430 is turned on. 9. TV / VCR The gain for the TV / VCR input is controlled by this rotary control. 3.
Owner’s Manual 13 15 AL2430-2PH 14 16 Wireless Infrared Classroom Sound Reinforcement System 20 21 22 23 24 25 17 18 19 AL2430 Rear Panel Description 13. Infrared Sensors These three “F” type connectors are for input of the AL-IRDS antennas. 18. Priority Page Input This input accepts line or speaker level input to allow an external source to override the audio output of the AL2430. 14. Microphone EQ These three rotary controls provide equalization of the wireless microphones.
AL2430-2PH Wireless Infrared Classroom Sound Reinforcement System Owner’s Manual 26 37 38 39 28 32 33 27 34 35 36 30 31 29 28 AL-PH Wireless Microphone Description 26. Microphone High quality internal microphone is used when the unit is in the handheld or lapel configuration. 33. Mute Button Depressing this button in Mode 1 mutes the Microphone output of the AL2430 Receiver / Amplifier. Depressing this button in Mode 2 mutes the multimedia output of the AL2430 27.
Owner’s Manual AL2430-2PH AL-DOCK Description Wireless Infrared Classroom Sound Reinforcement System 40 40. Microphone Charging Receptacles Holds the Microphones in place while charging. The microphones can be placed in forwards or backwards. 41. Microphone Charging LEDs These LEDs indicate the current charging status of each receptacle: Red = Charging, Green = Charged. 41 42. Battery Cover This provides a charging location for four additional AA size batteries. 43.
AL2430-2PH Wireless Infrared Classroom Sound Reinforcement System Owner’s Manual AL2430-2PH Installation Description 1. Unpack AL2430-2PH system and confirm all components are present and undamaged. 2. Find suitable location for the AL2430 Receiver / Amplifier within 10' of a 120VAC outlet. 3. Find suitable location for the AL-Dock battery charger within 6' of a 120VAC outlet and insert both AL-PH microphones. Note: The batteries must charge for 8 hours before use. 4.
Owner’s Manual AL2430-2PH AL2430 Block Diagram CH A Active IR Sensor 1 Wireless Infrared Classroom Sound Reinforcement System LED 70.
AL2430-2PH Wireless Infrared Classroom Sound Reinforcement System Owner’s Manual Limited Warranty All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.