Brochure

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]
AtlasSound.com
2/3
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004103 RevA 7/11
Architect and Engineer Specifications
Loudspeaker shall be bidirectional, twin projector Atlas Sound APT-
34AT or ap proved equal. Full range audio power rating shall be 30
Watts. Frequency re sponse shall be 400Hz –12,500kHz (nominal),
450Hz–12.5kHz (±5dB). Sound pressure level shall be 112dB
(30W/1M), 101dB (1W/1M). Sound dis per sion of the double re-entrant
type dual-exponential bells shall be 175˚ in each di rection. Model
shall have impedance selection via seven position switch including a
45-Ω tap. Power taps shall be available at 0.9, 1.8, 3.7, 7.5, 15 Watts
on 25V line, 2, 3.8, 7.5, 15, and 30 Watts on 70.7V line and 4, 7.7,
15 and 30 Watts on 100V line. For wiring and vandalism protection,
Atlas Sound __________ (Model BX-1A) ar mored cable adapter shall
be avail able where speci fied. Finish shall be grey baked epoxy.
Di mensions shall be 16
1
⁄2" (419mm) long x 9
3
⁄4" (248mm) bell di ameter.
Weight shall be 9 lbs. (4.1kg).
Accessories
BX-2A. Vandal Resistant Cover Plate for Armored Cable and Conduit
Connection. Constructed of Cast Aluminum.
Mounting Flange
9
⁄32" Diameter
3 Holes 120°
Apart, On 2.312
Bolt Circle
2
7
⁄8" Diameter
1
⁄2" Banding Slot
1
3
⁄4"
2"
Atlas Sound products are designed and tested in our well-equipped research laboratory which contains a fully anechoic chamber, complete analog Bruel & Kjaer
measurement equipment and the TEF 20
®
audio analyzer. Atlas Sound is proud to be a beta site for TEF
®
software.
APT-34AT Polars (Normalized to Zero on Axis) (-6dB)
16
1
⁄2"
9
3
⁄4"